Quantcast

Spot hub help?

Discussion in 'The Shop' started by JohnE, Apr 10, 2008.

  1. JohnE

    JohnE filthy rascist

    Rep/Likes:
    147 / 641
    Joined:
    May 13, 2005
    Messages:
    12,686
    Location:
    Front Range, dude...
    (I cut and pasted this from the SS forum...)

    My SS Spot rear hub is begining to bind up a bit. I took a look at it to see if I could rebuild/re grease/lube/sprinkle goober dust on it to get it rolling well again, but cant make heads or tails of it. I know I could take it apart. Thats the easy part. But repairing then getting it back together again is the trick. Spot web site is of no help...anyone got a clue on these?

    Bueller, Bueller?
     

    Please register to disable this ad.

  2. w00dy

    w00dy In heaven there is no beer

    Rep/Likes:
    6 / 27
    Joined:
    Jun 18, 2004
    Messages:
    3,428
    Location:
    that's why we drink it here
    Take it apart. Best case scenario you figure it out and get it back together properly. Worst case scenario you ruin it. You can always cop out and take it to the bike shop after you've opened it up. Either way it's a good excuse to invest in some cone wrenches.