[Bacardi]

Anybody have the measurements of their standard stem for stinky's? I have 02 Dee-lux.....Kona tech http://www.konaworld.com/kw_index.cfm info only showed this for 2003 tech info:

Control Stem
* 175 grams
* Cold-forged Aluminum for Kona Cross-Country
* 8 or 17 degree rise
* Lengths from 75 - 120mm

Maybe its 17' by 120mm?



I am asking because, am thinking of going with a shorter stem. as you can see from the pic below, if I go shorter, I need quite a rise to keep the current head angle/1 inch of fork above upper crown......and I don't really want to add spacers.

Anyone know of short stem with like 15'+ rise? Suggestions?

 

[Roasted]

It is under tech area on www.konaworld.com

The 2002 bike info is about halfway down in the section the is labelled ONLINE.

Damn site is going to slow to look up the info...it is there though.,

 

[Bacardi]

well i got an email from Kona:
The Dee Lux has a 15'/80mm stem, unless there was a change.

Joe


The component list does NOT include STEMS:
KONA COMPONENTS
KONA BULGE CROMOLY CRANK
KONA RING OF FIRE ROCK GUARD
KONA DB RISER HANDLEBAR
KONA DH RISER HANDLEBAR
KONA DH PRIMO HANDLEBAR
KONA BULGE HUBS
KONA JACK**** PEDALS
REPLACEMENT NOTE

 

[oldfart]

Originally posted by Bacardi
[
I am asking because, am thinking of going with a shorter stem. as you can see from the pic below, if I go shorter, I need quite a rise to keep the current head angle/1 inch of fork above upper crown......and I don't really want to add spacers.

[/B]

The photo "looks" like a 90 or 80mm long stem. Stem has zero influence on head angle or how many spacers you might need. Are you talking about clamp height? I think your confused or perhaps asking a question the wrong way? I have many days like that too.

 

[Bacardi]

nope.

by keeping 1 inch of fork above upper crown I have a problem if I move my bars back with shorter stem, cuz they mite hit the top of the fork. I don't want them to hit. And, I don't want to slide the stanchions down (which would make the HA 1 degree more slack, u with me?)

So I need a stem of a rise 15' + and 50mm/35mm or similar. Not worried about clamp height yet, though I guess I should be Aren't most stems about the same with Clamp height?

 

[Broken]

If you get a new one and want to sell the one you currently have let me know. email at FluByU@cox.net or PM me.

 

[Element]

Originally posted by Broken
If you get a new one and want to sell the one you currently have let me know. email at FluByU@cox.net or PM me.

You just bought a couple, you dingwad. What are you doing, collecting them?

 

[Broken]

You just bought a couple, you dingwad. What are you doing, collecting them?

I'm building a shrine

 

[Element]

You should pray to me!

That way, you will learn how to ride without breaking bones

 

[Broken]

Tuck and roll grandma