[comtom1]

I have an 03 gemini with the breakout and i am going with the the new fox 36 any one have any ideas or tech help with this like what is the best headset for this upgrade or schould i go with maniteau. But i am still leaning towards fox but my bud still rigdes marz forks but i think fox has a better fork right know. Has anyone done the downsize with good results. Or even troulbes thanks in advance Tom

 

[Buzam]

E13 makes reducer cups, should be no problem...

 

[comtom1]

Is the bearing size larger or is it just an insert with the same size bearings the desct. doesnt give bearing size or cup depth i was hopeing that king made a steel headset for this application but no luck

 

[peopleschamp21]

you can't use the e 13 cups on the older cannondales. it will have play. i had a 2004 gemini that came with a manitou that i switched to a travis. i got two flat reducer cups from cannondale and a king 1-1/8 headset. there was no problem with that set up and i am still using it on my judge.

if you do get a 2006 or newer cannondale. you can use the e-13 zero stack reducers.

i would go with the fox 36. that fork is just a mini fox 40.

 

[comtom1]

Thats what i thought i picked out the 36 van r lot better than the maniteau sherman