I'd rather ride a frame welded by dolphins.I didn't see the E either. Thought it was supposed to be dolphins.
I'd rather ride a frame welded by dolphins.I didn't see the E either. Thought it was supposed to be dolphins.
Chainstay wasn't that bad, down tube sucked as the ports are pretty small. They give you long strips of rubber tubing to keep the cables quiet, but the diameter of the tubes is much bigger than the ports - the chances of you ever getting them out again if you use them are slim to none. They only give you two ports for cables at the headtube on the alloy frame, and the port covers are singles, so there's no way to route dropper, brake and derailleur without ditching a port cover. Since I always route my rear brake externally using stick-on c-clips it's not an issue, but still kinda sloppy.having fun routing the derailleur housing through the bronson? especially the chainstay? patience, my friend . . .
Interesting - downtube on the nomad was the easiest of the three, followed by the dropper (getting the bend back up into the seat tube was a bit of a pain . . . but the one on the chainstay definitely took me many frustrated attempts (and beers).Chainstay wasn't that bad, down tube sucked as the ports are pretty small. They give you long strips of rubber tubing to keep the cables quiet, but the diameter of the tubes is much bigger than the ports - the chances of you ever getting them out again if you use them are slim to none. They only give you two ports for cables on the alloy frame, and the port covers are singles, so there's no way to route dropper, brake and derailleur without ditching two port covers. Since I always route my rear brake externally using stick-on c-clips it's not an issue, but still kinda sloppy.
They're just fucking with you since you bought AL. If you had bought the CC it would all be primo.Chainstay wasn't that bad, down tube sucked as the ports are pretty small. They give you long strips of rubber tubing to keep the cables quiet, but the diameter of the tubes is much bigger than the ports - the chances of you ever getting them out again if you use them are slim to none. They only give you two ports for cables at the headtube on the alloy frame, and the port covers are singles, so there's no way to route dropper, brake and derailleur without ditching a port cover. Since I always route my rear brake externally using stick-on c-clips it's not an issue, but still kinda sloppy.
I can confirm. My CC hightower has proper external chainstay cable routing though.They're just fucking with you since you bought AL. If you had bought the CC it would all be primo.
$3000 wheel set that cracks, delaminates, has misaligned holes...who buys this shit?
https://m.pinkbike.com/news/review-enve-m735e-wheelset.html
olololololol$3000 wheel set that cracks, delaminates, has misaligned holes...who buys this shit?
https://m.pinkbike.com/news/review-enve-m735e-wheelset.html
surprised this wasn't just another "pre Production" set$3000 wheel set that cracks, delaminates, has misaligned holes...who buys this shit?
https://m.pinkbike.com/news/review-enve-m735e-wheelset.html
my money is on them building their own rims, eventually.Sounds like Enve needs to hire Guerilla Gravity to build rims for them.
idk, if i was a bike component i'd probably commit suicide too if i was destined for an e-bike$3000 wheel set that cracks, delaminates, has misaligned holes...who buys this shit?
https://m.pinkbike.com/news/review-enve-m735e-wheelset.html
Seems like they have the optimal technology to do it, and could undercut the competition if their frame is any indication. 300% impact resistance is awesome for frames, but really awesome for carbon rims.my money is on them building their own rims, eventually.
was going to say... e-bike riders?$3000 wheel set that cracks, delaminates, has misaligned holes...who buys this shit?
https://m.pinkbike.com/news/review-enve-m735e-wheelset.html
They need to more clearly label their e-bike articles. I wouldn't have read it otherwise.idk, if i was a bike component i'd probably commit suicide too if i was destined for an e-bike
Seems like they have the optimal technology to do it, and could undercut the competition if their frame is any indication. 300% impact resistance is awesome for frames, but really awesome for carbon rims.
I got pretty upset when I got to the end and realized this was an e-bike specific rimThey need to more clearly label their e-bike articles. I wouldn't have read it otherwise.
Yet you're dumb enough to own an e-bike........hah ha
I'm one of the few folk here who even admits to having an ebike and I'm not dumb enough to read a fucking Ebike specific rim review.
I want a yeti specific formula once their ebike launchesSpeaking of eBike-specific products...I saw this at my lbs earlier today.
ExactlyYet you're dumb enough to own an e-bike........
Ebike specific stuff is hilarious.Speaking of eBike-specific products...I saw this at my lbs earlier today.
Seriously well guess we gotta keep the S&M chuckleheads occupied removing coin from the stupid Joey's.Speaking of eBike-specific products...I saw this at my lbs earlier today.
the fuck?Speaking of eBike-specific products...I saw this at my lbs earlier today.
Well it is better than "Ringpiece" which is where I went after reading your "Ring of Fire"GG could call their rim “the circle pit”...or go old skool badass “the ring of fire”
Ring of Fire would be a good name. It’ll be awhile though, the frame/bike order queue is getting pretty long. We just hired four more people to help speed things up. We’re gonna need a bigger boat...GG could call their rim “the circle pit”...or go old skool badass “the ring of fire”
2 weeks?It’ll be awhile though, the frame/bike order queue is getting pretty long.
Hawaii, or at least Maui County, has that law but no one actually does it except Walmart. Buy a bike there and at checkout they make you pay an extra $10 fee. I've never heard of someone getting a ticket for being unregistered.This is also what is wrong with not the bike industry
http://www.wect.com/2019/02/27/nc-bike-bill-would-require-cyclists-register-bikes-pay-registration-fees/
Bike Lizards are still in the egg compared to the Audiophool world.
as much as i hate the buzzword, i really wanna try one.DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDOWNCOUNTRY BIKE TIME
https://www.pinkbike.com/news/salsa-updates-full-suspension-line-up-including-first-official-downcountry-bike.html
GETTTTTTTTTTTTT READY FOR BUZZWORD DUJOUR FOR 2019
DOWNCOUNTRY TIME