I had problems fitting the 450lbs RCS Ti spring I had on my Manitou 6 Way on my new DHX 5.0 Shock. That spring was too large and was touching the shock's pigback. I solved the problem removing the blue part on the pigback used to set end-stroke.
i have been using a 5th spring on a dhx for about 3 months with no problems.. i measured the internal and extrenal diameter of the spring and its the same as the dhx one.
ya I have a manitou ti on my dhx and it works fine, the spring left little scrape marks on shock, I'm guess its because its not made for it so no big deal
sorry for bringin this thread back but i've reconsidered getting a dhx again. i emailed fox and they said they had no clue whether it would fit or not. big help...
I had problems fitting the 450lbs RCS Ti spring I had on my Manitou 6 Way on my new DHX 5.0 Shock. That spring was too large and was touching the shock's pigback. I solved the problem removing the blue part on the pigback used to set end-stroke.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.