[44andcounting]

I have Tomac Magnum frame,rear hub, and taped square BB arriving this Monday and want to get started on building the vehicle that will take me straight to the E.R.-What are the the drivetrain options currently available? I already have Profile crank setup, Mr. Dirt & Sun Ringle guide, and a 7" inverted fork ready to go. I am open to replacing any of the components I already have with better funtioning gear. ALSO FEEL FREE TO SHIFT TO ANY OTHER TECHNICAL TOPIC REGARDING THE MAGNUM 204. I'll have to disregard any remarks about getting a different frame though, this 2004 Tomac Magnum 204 frame has "brought my wife and I closer than ever". I am not pressing any further.-Thanks and let the tech. tips fly

 

[ÆX]

it has a 100mm bb width.

profiles might need a longer axle.

i have lightlly used ISIS FSA

then you can run normal cranks.

if it has a basooka/5th/SPV get it switch for a DHX.

 

[44andcounting]

Good Deal
The frame arrived today and it is perfect. They tossed in a square taper BB and a brand new Mr. Dirt Setup. Anyone have a Square DH crank setup with 5/110 BCD?
Thanks

 

[ÆX]

http://cgi.ebay.com/Azonic-Carbon-Crank-Arms-110-74BCD-175mm-Like-New_W0QQitemZ250054650765QQihZ015QQcategoryZ56193QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

i have ran these cheep carbon arms for 3 years with no problems.
lots of rocks have scratched the ends and they still are fine.

cheep and light give them a try.

what do you weight?

 

[44andcounting]

I emailed you this morning about the size and then saw it glaring at me right on top. I am watching your auction. I am around 190lb.

 

[ÆX]

its not my auction but i use them and they are great cranks.

 

[JRogers]

Sweet; I used to have a 204 and really liked it. I ran a square taper Race Face BB with AC cranks and had no problems. My Mr. Dirt was beat to crap so I took all the rollers out of it and it worked better than ever.

Rear shock was a Push tuned Fox RC. Did pretty well with that setup.