Any of you had the joy of installing the rings into a Vivid? I am hoping to do it without the plastic holder for the can just not sure how tight it is. Will I need the plastic holder?
I've removed the can and regretted buying the plastic holder tool. Not necessary. When I inquired about volume reducers over the summer I was told they don't exist.
Those are them there. I went by SRAM and had Joe there install 4 rungs into it for me. I can still bottom it out when bunny hopping it! I am gonna go back after new year and have him top it off with as many as it will hold.....
I looked at the service pdf and it shows that when I had the air can off I coulda just pulled the inner sleeve out and slid volume rings on it. Huh. Weird no one at Rockshox knew about this when I asked a few months ago. There's a chart saying how many rings you can fit in different length shocks. 10, 12, or 13
Yeah I didnt know and said go 1/2 way. I can't really tell a difference at least in the street. I am at about 250 PSI now and right at 30% sag. So I may have him fill it upl next time I do it.
What frame? I'm 170lb on a Nomad. I usually like a pretty linear spring so I can have only 30% sag and a firm ride but still use full travel. With the Monarch shock I'm content with the stock spring curve at 212psi. Wiith the Vivid I run 180-185 and get a good sag and feel but bottom it or nearly bottom more often than I should. The service pdf also mentioned changing to a firmer bump stop so that's another way to firm up the last 20% of travel.
Yeah I didnt know and said go 1/2 way. I can't really tell a difference at least in the street. I am at about 250 PSI now and right at 30% sag. So I may have him fill it upl next time I do it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.