[Dunshee80]

What stem lenght are you running on your DH bikes? This could also be asked as, if you were going to buy a new DH stem today, what length would it be?

Thanks

 

[AlberTop]

What's a stem? I use a Dorado DH.

Just kidding... I use the integrated Dorado stem on the second hole. I think that should be a 45 or 55.

 

[Sir_Crackien]

75mm but i'm a big guy

 

[biggins]

i am running the mazocchi integrated stem in the longest setting, now that i have my new frame though i think i might move it to the shorter setting because the top tube is longer. If i were running a stem though it would be a 50 with zero rise.

 

[Softy]

The marz integrated at 50mm.

 

[ChrisRobin]

I started with a 70mm with 10deg. rise...I liked it. Then I put my old 50mm with 10deg rise and liked it better. So...my next stem (Easton) will be 50mm.

edit: oh, I'm 5'11 and run a medium frame.

 

[Pedalist]

50mm with I am not sure what rise.

 

[Curb Hucker]

SIC LL 50mm 0*

 

[Jorgen]

Used to run a 60mm 5degree on my Tomac, now it's sold.
Would NOT go longer on that bike.

 

[Gary]

55mm length 0deg. with no A/H spacers underneath.

why are you asking?

 

[McGRP01]

45mm/0* rise

 

[Wingnut]

I'm running the Dorado integrated on at the longest setting. I used to run a 50mm.

 

[mack]

45 mm

 

[Toshi]

woodman 50mm, minimal but not 0 rise

 

[BigMike]

70mm for me

 

[Dartman]

RF Diabolus fitty mm

 

[ioscope]

Marz. int. Shortest setting Spacers under shiver crown (would hit headset)

 

[dromond]

50mm 0 degree rise made by Storm.

 

[The Kadvang]

50mm 0 degree rise hussefelt.

 

[Brian HCM#1]

50mm for me

 

[toodles]

55mm length 0deg. with no A/H spacers underneath.

why are you asking?

What stem is that?

50mm, 5º rise Azonic shorty

 

[SuspectDevice]

On my medium Giant Dh i ran a 70x10 with a 1" bar. I'm a long stem guy.

 

[Gary]

What stem is that?

this one:

http://www.kore-usa.com/sb1b.htm

I run it flipped with my boxxer upper tubes fully extended in the drop crown for a slack H/A but keeping low bars

 

[whoopnar]

Dorado integrated stem, at 50mm

 

[erikkellison]

Marzocchi integrated stem @ 50mm (short setting), .5in of spacer underneath. I primarily ride steep trails. I also have 2.5in riser bars.

 

[crashnscar]

Marzocchi integrated on short setting (I think 50mm)

 

[dexterq20]

Race Face Diabolus, 50mm x 10 degree rise

 

[Ciaran]

Kore B1B 45mm

 

[thaflyinfatman]

50mm. Don't feel the need or want for anything else.

 

[PAMS 25]

Woodman Rockster S, 35mm*10° rise.

 

[narlus]

woodman 50mm, minimal but not 0 rise

 

[ED75]

Last summer it was a 50 Romic integrated on a Boxxer,
next year I will go with the Marzo integrated set at ???? (if I do have the choice on the Risse crown)

On my Enduro bike, it's a 50 Thomson

My son uses a Woodman 35 on his Dirt/4X bike and a 50 Thomson on his DH bike.

 

[yojimborace]

40 holzfeller, its cheap on greenfishsports

 

[joelsman]

i am using a 888 integrated stem on my risse 888 crowns

 

[El Jefe]

Romic integrated 50mm

 

[-BB-]

The marz integrated at 50mm.

Ditto..

 

[MikeD]

used to run 45-50 on my 23" or so TT bikes; now I'm running a 60x10 deg flipped upside down (with 2" riser bars, though) and think it's better for cornering.

 

[partsbara]

i am using a 888 integrated stem on my risse 888 crowns

same......

 

[dw]

45-55mm adjustable e.thirteen Ali Boxxer direct mount

 

[Brad23]

45-55mm adjustable e.thirteen Ali Boxxer direct mount

how bout a pic to drool over??!! :redX: