I have a 06 medium as-x w/ 170mm 66rc2x.
I weigh around 170 w/o gear.
with the stock 450# spring I had about 50% sag. my LBS had an 550# spring which they replaced for free, now I have around 30% sag with minimum preload (didn't measure it exactly). according to Yeti's recommanded spring rates 550# is too much for me, but the 450# was too much sag. as far as I understand 50# difference doesn't really matters.. (also sag seems to be good anyway right now anyway..)
my setup is medium rebound, 125psi, about 1.5 turn borrom out and 4 click propedal.
the rear feels a little bit stiff for my taste, atlease when staticly sitting and playing with it.
on the fast or rocky traills I can feel the dhx working but on the more 'am' stuff it doesn't feel that plush.. any advice how to setup it better?
I weigh around 170 w/o gear.
with the stock 450# spring I had about 50% sag. my LBS had an 550# spring which they replaced for free, now I have around 30% sag with minimum preload (didn't measure it exactly). according to Yeti's recommanded spring rates 550# is too much for me, but the 450# was too much sag. as far as I understand 50# difference doesn't really matters.. (also sag seems to be good anyway right now anyway..)
my setup is medium rebound, 125psi, about 1.5 turn borrom out and 4 click propedal.
the rear feels a little bit stiff for my taste, atlease when staticly sitting and playing with it.
on the fast or rocky traills I can feel the dhx working but on the more 'am' stuff it doesn't feel that plush.. any advice how to setup it better?