thisJust get a hacksaw blade with the highest tooth count from the hardware store. Wrap tight with painters tape or similar to prevent tear-out.
Sand smooth with fine sandpaper.
Do not inhale the dust.
Update will.
fo shizzle. those crabon bars will kill you. just ask @kidwooI put that last bit in there just for you
I am the fattest I have ever been and I have a 175g carbon bar on the way, what could go wrong?fo shizzle. those crabon bars will kill you. just ask @kidwoo
Do you have Chromag BZA bars? Thoughts?Uncut or death!
Which looks similar to the park blade. Is it as phat though?Not sure why my link posted as "robot or human"
But Stanley makes a diamond grit hack saw blade.
Do you have the new updated Park saw guide?Which looks similar to the park blade. Is it as phat though?
As my park blade using park guides isn't a good combination for blade longevity.
Mountain biking is about taking chances, just freehand it.Which looks similar to the park blade. Is it as phat though?
As my park blade using park guides isn't a good combination for blade longevity.
I do, and an older one. I was probably using the narrow slot not liking the amount of wiggle room the wider slot had when trying to do a square cut.Do you have the new updated Park saw guide?
I was going to pick up one of these, as the one I have right now is pretty shitty.
SG-7.2 Oversized Adjustable Saw Guide
Cut virtually any round or aero tubing found on seatposts, steering columns, and handlebars, using a standard or carbon-compatible hacksaw blade.www.parktool.com
I think it's basically the same thingWhich looks similar to the park blade. Is it as phat though?
As my park blade using park guides isn't a good combination for blade longevity.
just put your brake levers where you want the cut and give the clamp a few ugga duggas.just scratch it and then hit the end with a baseball bat
I read on the internet that carbon is really strong so you should be good