[Mr.Flannery]

I'm getting an '02 Monster T but the problem is that it has no top crown. It has 40mm stantions so would a Fox 40 top crown (or any other top crown for 40mm stantions) work? I wasn't sure if the spacing would be correct.

Also, a buddy of mine found this website.
http://www.go-ride.com/prod_lowriders.html
Would that one work?

 

[Mr.Flannery]

Also, could a shiver top crown possibly work?

 

[skatetokil]

shiver crowns don't clamp to stanchions. 40s will have a different offset probably. in other words no.

 

[DownCycles_Stef]

Only Pre-2003 Monster T Crowns will work. There is no other traditional fork I am aware of that has 40mm stanchtions with the same leg-to-leg & offset that the 2002 & earlier Monster T's have. Check with your LBS, many suppliers still have old parts availible, and Marzocchi may also have some left.

 

[Alex_M]

actually, any monster T crown set will work, I'm running 04 crowns on my 99(same leg spacing, slightly less offset). Doubt 40 crowns would work though, the chances of the leg spacing being the same are slim to none.