Thanks guys! Looking at the Marzocchi site sober is a lot easier as I found out this morning... turns out you have to create a login before getting access to the relevant info.
Anyways... did an oil change (along with a full tear-down) today and 335cc is a bit too much in the RC3 leg. I removed the spring and cycled the damper and with 335cc, the fork does not get full travel. (about 1.5" left when it hydro-lock's...)
I found out that around 275-290cc is the ticket. Hope this helps somebody out there...
Bet you still had old fluid in there. When this could be the case, always measure from the top with the stanchion bottomed out and the damper fully extended. Unfortunately I don't know what that measurement would be.
Ya, I prolly f***ed up and didn't cycle all the old oil out, but honestly at this point... not really that concerned with it. Fork works wonderfully (open bath > ** for ease of service)
Off to Whistler in 4 days so we'll see how it holds up!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.