[moose99ps]

so i bought a wireless computer yesterday. its a serfas. i go to install it and it says pickup and magnet have to be within 4mm of each other... with the shock tube and spokes being so far apart that isnt possible.. anyone have an idea for this??? call me whatever for having it but i like it... anyone have any ideas? maybe a diffrent brand or something?

 

[sanjuro]

Put another rubber shim under the sensor, or a piece of tube.

 

[SKYWAYBUZZ]

Can you mount it at the bottom of the lowers close to the hub. Better there anyway.It isn't in the way when putting your wheel in.

 

[moose99ps]

i got it mcgivered on.. put it on the inside of the shock tube with some double sided tape with clear tap over it and around my tube... worked for my 15mile ride today but looks ghetto as hell... got an idea in mind.. guess i need to find a machineist

 

[moose99ps]

Put another rubber shim under the sensor, or a piece of tube.

unfortunately the sensor hooks to the spokes so theres no way to shim it.

 

[davep]

unfortunately the sensor hooks to the spokes so theres no way to shim it.

magnet attaches to the spokes.





The sensor attaches to the fork.

 

[moose99ps]

magnet attaches to the spokes.





The sensor attaches to the fork.

oh woops.. yea thats the way.. i got it figured out but ima have a piece machined.. thanks for yalls ideas!

 

[sanjuro]

unfortunately the sensor hooks to the spokes so theres no way to shim it.

Ok dumass. Try the pickup then....

 

[moose99ps]

ill get a picture of the only way it would work later tonight maybe.

 

[sperkins]

Can you mount it at the bottom of the lowers close to the hub. Better there anyway.It isn't in the way when putting your wheel in.

yeah definitely try to mount it at the bottom close to the hub. Hopefully it will work out for you!