srry guys to ask so many questions but im wondering what frames i should consider, i was going to buy a freeride hardtail frame but i do mostly dirt jumping so ill stick with that. I currently have a norco havoc 09, now i need a new frame since i made the mistake of buying a small. So the frames im considering are banshee amp, transition bank. Now im not sure what other parts i would have too buy or if all the parts from my havoc will fit the new frame. (im willing to spend around 550, maybe a little more if its worth it)
considering...
- Thread starter djbiker
- Start date
so im going with the bank for availability and other reasons. Looking through specs and everything it looks like everything should fit on the frame, correct me if im wrong.
frame-6061 alloy, slotted dropout, integrated headset, ISCG mount
fork-Marzocchi Dirt Jumper 3, 100mm travel, 1-1/8" steer tube
rear shock-N/A
headset-FSA Impact 8D integrated
crankset-CR-24C chromoly BMX crank, 28T 3 mm thick sprocket
bottom bracket-48 spline, 19 mm axle BMX BB for Euro BB
pedals-Oddessey Twisted pedal, white plastic
chain-KMC K-710 BMX white nano plated
cassette-Single 14T conversion sprocket with spacers
front derailleur-N/A
rear derailleur-N/A
shifters-N/A
bar-Alloy 31.8 mm , 670 mm width 50 mm rise bar, black
stem-AS-13 alloy stem 31.8 mm bar, 60 mm ext
grips-Alien Nation Mr. Hand rubber, orange
front brake-Hayes MX-4 mechanical, 6" rotor
rear brake-Hayes MX-4 mechanical, 6" rotor
brake levers-Tektro MT-2.0
front hub-KT alloy disc hub, 32 h, orange
rear hub-KT 135 x 10 nutted, 8 spd, 32 H, orange
rims-Alien Nation PBR 26", 32 hole, black
spokes-Stainless White 2.0
tiresKenda K-Rad 26 x 2.30
saddle-Pivotal thin seat, custom Norco design cover, hollow bolt
seatpost-Pivotal forged alloy, 27.2
transition
Bottom Bracket: 73mm (51mm chainline)
- Headset: Standard 1 1/8" (1" deep cup compatible)
- Seatpost: 31.6mm
- Seat Clamp: 34.9mm
- Rear Dropout Spacing: 135mm x 10mm (nutted axle & QR compatible)
- Disc Brake Mount: International Standard
- Chain Guide Mounting: Standard ISCG
im also going to order a new seat to.
frame-6061 alloy, slotted dropout, integrated headset, ISCG mount
fork-Marzocchi Dirt Jumper 3, 100mm travel, 1-1/8" steer tube
rear shock-N/A
headset-FSA Impact 8D integrated
crankset-CR-24C chromoly BMX crank, 28T 3 mm thick sprocket
bottom bracket-48 spline, 19 mm axle BMX BB for Euro BB
pedals-Oddessey Twisted pedal, white plastic
chain-KMC K-710 BMX white nano plated
cassette-Single 14T conversion sprocket with spacers
front derailleur-N/A
rear derailleur-N/A
shifters-N/A
bar-Alloy 31.8 mm , 670 mm width 50 mm rise bar, black
stem-AS-13 alloy stem 31.8 mm bar, 60 mm ext
grips-Alien Nation Mr. Hand rubber, orange
front brake-Hayes MX-4 mechanical, 6" rotor
rear brake-Hayes MX-4 mechanical, 6" rotor
brake levers-Tektro MT-2.0
front hub-KT alloy disc hub, 32 h, orange
rear hub-KT 135 x 10 nutted, 8 spd, 32 H, orange
rims-Alien Nation PBR 26", 32 hole, black
spokes-Stainless White 2.0
tiresKenda K-Rad 26 x 2.30
saddle-Pivotal thin seat, custom Norco design cover, hollow bolt
seatpost-Pivotal forged alloy, 27.2
transition
Bottom Bracket: 73mm (51mm chainline)
- Headset: Standard 1 1/8" (1" deep cup compatible)
- Seatpost: 31.6mm
- Seat Clamp: 34.9mm
- Rear Dropout Spacing: 135mm x 10mm (nutted axle & QR compatible)
- Disc Brake Mount: International Standard
- Chain Guide Mounting: Standard ISCG
im also going to order a new seat to.
