My first run with a "video" device. Will mess with it more. Will have some stuff from Santa Barbara in the next few weeks.
2011 Zerode G-1 - YouTube
2011 Zerode G-1 - YouTube
Go-Pro Zerode Suspension View
- Thread starter ianjenn
- Start date
do you have a bell on the bars or is that thing that noisy?
He probably has a freewheel hub.
you can also run the brake inside next to the gearbox so its not rubbing on the frame
That would be a bell. The spot I ride has a lot of wild boars around. It alerts them to run. I almost ran into one couple of times before.
Lol, I should actually wake up before posting next time.
interesting to see how much your feet rub on the cranks!
Yeah that trail is now overflowing with hikers. So the bell is on the front hence why Bob came along for the ride. Just help cover the clanking. Next time I will mount it on my head and not use a bell go during the week early! Yeah those SAINTS are now silver.
Looks nice. A really impresive bike!
where was the gopro mounted. Obviously on the downtube. But what kind of mounr did you use?
where was the gopro mounted. Obviously on the downtube. But what kind of mounr did you use?
and how would you do that?you can also run the brake inside next to the gearbox so its not rubbing on the frame
He meant you can route the brake cable through the frame, not around the outside as shown in the video.
i feel like this video could have been a whole lot shorter without any loss of the overall idea...
Nice work, the suspension looks extremely responsive.
I used the XC helmet mount. Worked well didn't move.
Vented Helmet Strap Mount - GoPro Official Store: Wearable Digital Cameras for Sports
THANKS...... video isn't my thing. But I should have helmet footage of Lancaster soon running down some long rock strewn trails!!!
Through the gap between the top of the Alfine and where the seatpole comes through. There are hose guides on the frame too for a cable tie.and how would you do that?
I had to remove the Alfine from the frame though on mine to get the caliper through as I didn't want to bleed the brake again, which involved removing the steel plates on the outside of the frame and unbolting the swingarm from the main pivot.
he forgot to add brake hose in his statement. it would have made more sense