hayes brake adapter for a 2011 boxxer
- Thread starter bigbirdie
- Start date
I'm fairly certain you need a 6 to 8" post mount adapter. Let me check my records and see if I can pull it up. I believe it's a magura QM8 or similar.
OK I bought a QM7 for my 2010 Boxxer and 2010 Saint disk brakes using a 203mm rotor.
No. 7: For post type caliper to post type fork 203mm
http://www.pricepoint.com/detail/18636-115_MAGQM8/Magura-QM-Brake-Adapters.htm
The magura adapters are quite a bit cheaper than shimano, and come prepped with red loctite so you can grip n rip. You DO NOT want a "Boxxer adapter" this was the retarded adapter that only the boxxer fork used, it was two bolts parallel and had nothing to do with IS nor PM standards. That was the 2006-2009 fork era.
No. 7: For post type caliper to post type fork 203mm
http://www.pricepoint.com/detail/18636-115_MAGQM8/Magura-QM-Brake-Adapters.htm
The magura adapters are quite a bit cheaper than shimano, and come prepped with red loctite so you can grip n rip. You DO NOT want a "Boxxer adapter" this was the retarded adapter that only the boxxer fork used, it was two bolts parallel and had nothing to do with IS nor PM standards. That was the 2006-2009 fork era.