[Revol]

I've installed a BETD long travel link on my Y2K FSR Rockhopper and I need a stiffer spring to use the 5" travel setting.
What I need to know is:When measuring the stroke of the shock is it measured from the body to the spring collar or from the body to the bottom out bumper?
The shock is a Fox Vanilla (OEM model,no rebound etc) measuring 6.5" eye to eye.There's no writing on the current spring BTW.

Cheers.

 

[dhmtbj]

I would say it is the distance from the shock body to the collar. Otherwise, the spring would bottom out before the shock. Not a good thing

 

[SpasticJack]

Most 6.5" eye to eye shocks are 1.5" stroke. As long as the spring will physically fit on the shock and has at least that, it should work for you.

 

[auntesther]

measure it along the shaft from the bottom of the body to the bottom of the bottom out bumber.

 

[Revol]

Thanks fella's.
1.5" stroke sounds right.Just wanted to make sure before I worked out the leverage ratio etc to decide what weight spring I need.

 

[SwisSlesS]

shock stroke : eye to eye length ratios are usually pretty standard. So I would agree with what has been said so far, 1.5 inch stroke.