Need new shock mounting hardware. Picked up a nice Avy shock for my project bike but guess what...shock hardware isn't the same as the Fox that came off.
On the fox, I measured 52mm wide on the lower pin and mount, and 34mm wide on the upper mount. My calipers do not have a digital display, so I'm going by the nearest mm. Avy lists 33.65 and 51.9mm as the nearest fits. Are those correct?
For the other frame that I'm building up, I measure 43mm on the mounts (i don't have hardware for it). The nearest fit I can find for Fox is 43.69mm, (Link). The next step appears to be either 42.16 or 44.86 (list). Will those most likely fit? Pricepoint doesn't have the ones I need...but cambria does.
For the Avy, I'll probably grab a pair of the offset mounts here since they're the same price as Avy mounts and they'll allow me to further tweak the geometry of the frame (including leave it alone). Anybody have input on those?
On the fox, I measured 52mm wide on the lower pin and mount, and 34mm wide on the upper mount. My calipers do not have a digital display, so I'm going by the nearest mm. Avy lists 33.65 and 51.9mm as the nearest fits. Are those correct?
For the other frame that I'm building up, I measure 43mm on the mounts (i don't have hardware for it). The nearest fit I can find for Fox is 43.69mm, (Link). The next step appears to be either 42.16 or 44.86 (list). Will those most likely fit? Pricepoint doesn't have the ones I need...but cambria does.
For the Avy, I'll probably grab a pair of the offset mounts here since they're the same price as Avy mounts and they'll allow me to further tweak the geometry of the frame (including leave it alone). Anybody have input on those?