I've got a little time and would like to open up my Dorado to re-arrange the shims and whatnot since the stock settings seem to be way off. The low speed compression and high speed (well from what little I can test of it where I am) is a bit too much even in the all the way open. Also, the rebound is a little on the slower side.
Does anyone have any good schematics or setup advice. The stock springs should be fine since I'm 185lbs, so I'll most likely have to be playing around with the shims.
Any help would really be appreciated.
Does anyone have any good schematics or setup advice. The stock springs should be fine since I'm 185lbs, so I'll most likely have to be playing around with the shims.
Any help would really be appreciated.