Ok, so I got it coated with a lather of grease. I got the drive side cup in and it's sitting flush with the shell. How tight do I tighten the Drive side cup to? I have a torque wrench and looked up specs and it's around 30 ft lbs. (well the average of the 2 numbers given for torque spec). So If I tighten the drive side cup to 30 ft lbs......
What do I tighten the non-driveside to? I know on my other bike I tried to tighten it to 30ft lbs and the bottom bracket didn't move. So I just sorta cinched it down and it's been fine.
Any help would be great! Everything is faced/chased, threads are excellent. Bottom bracket is a FSA plat. 73-113mm length.
What do I tighten the non-driveside to? I know on my other bike I tried to tighten it to 30ft lbs and the bottom bracket didn't move. So I just sorta cinched it down and it's been fine.
Any help would be great! Everything is faced/chased, threads are excellent. Bottom bracket is a FSA plat. 73-113mm length.