[_daemon_]

How do you fit a chainguide on a STP?
Looking at this
http://www.sicklines.com/reviews/e13-32special

it seems you need that three little bolt holes on your frame around the BB, that the
STP does not have.

have a look at this morewood frame at the BB about the bolt holes I am talking about
http://www.morewoodbikes.com/bikes/2008/shova-lt/tech.html#

 

[mystirbill]

If your frame doesnt have the ISGC mounting tabs (bolt holes) you need to get the version of that chainguide that is used for a bottom bracket mounting. The mounting hole on the guide is smaller and is meant to go behind the bottom bracket cup on the drive side of your bike. meaning you will have to remove the drive (right) side bottom bracket cup to mount it. when you order the guide it will have instructions in the box or go to e13's website for directions.

 

[FOXROX]

yeah all E13 guids come with an adapter that goes between the BB and the frame. it makes it so that you have the 3 isgc holes