intense 951 bearings...
- Thread starter AzN_devil
- Start date
All the bearings should be the same.
Are you saying you took the bearings out of your frame? Its hard to understand what your actually asking in the post but if you want to know what type of bearings are in your frame the # should be on the actual seal of the bearing.
Are you saying you took the bearings out of your frame? Its hard to understand what your actually asking in the post but if you want to know what type of bearings are in your frame the # should be on the actual seal of the bearing.
actually i mean they dont turn at all...
and yes i know there are # on the seal of the bearing but i forgot to copy it when i took the rear apart...
thats why im asking on here
Hey bud, I had one stuck on the arrival of my 951.
The boys at Fanatik came through for me and sent me replacements as soon as they heard...
The boys at Fanatik came through for me and sent me replacements as soon as they heard...
just what i needed
so i guess i should order
four 6001 2RS MAX for the upper linkage...
and
four 7001 1ZS MAX for the lower linkage...
thx
edit: kinda unhappy that the bearings only lasted half a year before they need replacing
Last edited:
get a Turner! [ needle bearings ] and grease ports no stickion on these puppies.
Sorry just kidding
Sorry just kidding
there are grease ports on the 951 as well...but imo they are badly placed..
sh1t just gets stuck to the port every ride..
would consider a turner if the price isnt so steep..
i can almost buy two 951s for the price of one turner
but then its not on my consideration list if i give up on my lovely 951