Top is M5x12mm and bottom is M5x25mm for the LG1+. The SRS+ uses a M5x22mm lower bolt.
anyone have a clue what size bolts those two gold ones are? I'm looking for replacements in red
Blue, black, red, silver, gold, etc not going to find a 22 however as that is not a stock lenght....but 25 can be cut!Top is M5x12mm and bottom is M5x25mm for the LG1+. The SRS+ uses a M5x22mm lower bolt.
Good luck as well, I looked briefly and couldn't find any other colored bolts (red would be sweet though).
Oh no you di'n't.Looks similar to the G2 with the wrapping around bash guard to the roller, does this infringe the MRP patent?
Same here. QBP should have them since May 1st. Bummer.No joy find a black version in stock at any online retailer. Grrr
Titanum, aluminium and steal all have their own special properties so you cannot mix nuts and bolts.. Sux dude!you guys have replacement parts yet? the new boomerang is most definitely not as strong as the old one. like way less strong. is the bolt for the pulley wheel compatible with a standard nylock? that aluminum nut sheared right off!
We've had multiple top World Cup riders as well as our own internal test riders literally TRY to break the taco, 30MPH direct hits into rocks, just stupid stuff that nobody in their right mind should ever expect a product to withstand. Direct hits to the idler, etc.. So far, we have not seen even one failure after 6 months of testing. Don't get me wrong, someone will find a way to mess one up at some time, people are good like that, and when it happens, replacement parts of course are available and in stock at distributors like QBP, BTI and Silverfish, etc..you guys have replacement parts yet? the new boomerang is most definitely not as strong as the old one. like way less strong. is the bolt for the pulley wheel compatible with a standard nylock? that aluminum nut sheared right off!
you guys have replacement parts yet? the new boomerang is most definitely not as strong as the old one. like way less strong. is the bolt for the pulley wheel compatible with a standard nylock? that aluminum nut sheared right off!
Looks good, you may be able to rotate the whole guide clockwise just a hair. Plus, you might be able to narrow up the taco angle setting one spot too. It's worth trying if you are into that sort of thing!a pic i snapped after getting it mounted, ditched the gold bolts
A few weeks according to sportzDoes anyone know when these would be out in oz?
I really wanted to get one (as my last lg bent on the top of the backplate), but i just couldnt find anywhere to get one from, so had to go for something else (dang)
Sounds about right, the order was finalized today and they will go out early next week. Transit takes a little time, and I'm not 100% sure about how long they will take to get to OZ.A few weeks according to sportz
Yeah, when you break your chain in half it's pretty hard to keep it on the bike..picture
Yo Brian,I'm bummed, looks like the LG-1+ will not work properly on the new Karpiel Disco since the tabs are rotated too far back. I had to modify last years version. I don't think there is enough material to remove to rotate the guide to where it's needed.
Nope, wont work.replace a bb spacer with the adapter? aren't they both 2.5mm?
What broke his chain?Yeah, when you break your chain in half it's pretty hard to keep it on the bike..
Try it some time and see how it works out for you.
in the other thread some one said something about smashing the derailleur.What broke his chain?
Dude's been training like a madman, raw horsepower!What broke his chain?