So here i sit doing the warranty work for the rebound damper for my fork, and I get it all set, and the oil height correct, and i put it on, and I cannot cycle the rod that is connected to the rebound circuit through the travel, it feels like it is basically bottoming out, like there is too much oil in the fork. problem is i have the correct oil levels in the fork.
So then I put the old damper back on, and same problem.
AM I crazy, 245ml and 153mm from the top of the stanchion.
Anyone got any ideas.. Ive been at this two hours.
So then I put the old damper back on, and same problem.
AM I crazy, 245ml and 153mm from the top of the stanchion.
Anyone got any ideas.. Ive been at this two hours.