After a couple of weeks riding, I noticed that my saint rotor was starting to move. Theres the aluminum lockring part that connects to the stainless steel disc part which is contacted by the pads. The connection between those parts are via rivets/pins? They are all moving. If you hold the wheel and move the stainless part of the disc, it rocks forward and back. So if you held the brake and move front and back, you could feel it move. Have any of you had this problem? I'm just scared that it would kinda shave metal away then one day i hit the brakes and the rotor snaps lol.
Shimano Saint Rotor?
- Thread starter alcoolaid
- Start date
Haven't had a chance to play with the Saint stuff yet, but...
With rotors that have a brakign surface rivited to a carrier, there is usually a bit of play for heat expansion to prevent rotor warping. I believe Magura Gustav and Hope Monot 6's have rotors like this as well. I would keep an eye on and see if it gets worse, if so call Shimano.
With rotors that have a brakign surface rivited to a carrier, there is usually a bit of play for heat expansion to prevent rotor warping. I believe Magura Gustav and Hope Monot 6's have rotors like this as well. I would keep an eye on and see if it gets worse, if so call Shimano.