Hey everyone, need a second opinion. I have an '08 Gary Fisher Piranha that came with a RS Tora set at 100mm of travel. Currently, the fork is leaking oil out of the rebound adjustment knob which is common I've been told. So I'm going to replace it instead of fixing it. The fork I'm contemplating replacing it with is coil sprung at 140mm of travel but I think the head tube angle will be way jacked if I jump up the travel. I have a small frame, so it's a fairly short wheelbase. I've read that 20mm of travel = 1 degree of head tube angle change but that can vary with wheelbase and other factors. In all honesty, 140mm is more travel than I need but the fork is a good deal. I ride mainly XC/All mountain and I really like the way the bike handles currently, I'm worried that I will regret going this route if I slacken the head tube angle 2+ degrees. I know it will affect climbing as well as low speed handling, I'm just not sure if that change will be tolerable for me. I believe the bike's head tube angle with 100mm is 69.2 if the geo hasn't changed from '08 to '10 so I'm looking at a ballpark 67 degrees. Am I nuts to expect my XC rig to ride well with this setup? My DH days are over and I no longer lust for a super slack HT angle, I'm sure I'll be told to quit being a tightwad and buy what's right for the bike. Thanks!