I will need to see pictures of your wife before I make decisions on fucking her?My simple deck rebuild has mushroomed into a full tear down/pour new footings $10k mahogany orgy.
That's with materials and labor at cost.
Fuck my wife...... I mean life.
morning... just clicked "go" on this cnc program i programmed yesterday.. looks simple but that middle slot is +/- 0.002" ( which is not THAT terrible )
was watching the news w the mates quite drunk last night when the looting started.. mindblowing ( or is it....)
A Haas..002" on a straight single axis cut doesn't seem that bad, I guess it depends on the machine cutting it?
milltronics partner 3.... 1990's cnc machine.002" on a straight single axis cut doesn't seem that bad, I guess it depends on the machine cutting it?
Good iron is usually good iron forever. Currently involved in retrofitting some old gantry mills from the 70's. That being said, crappy iron is crappy forever.milltronics partner 3.... 1990's cnc machine
but i just paused the program and she fits in tolerance. had a nice brand new 3 flute GARR 0.5" for this piece
I have to say, this old milltronics suprises me sometimes with the tight tolerences.... we have Unist on it ( great lubrication spray) but I am stuck with sending the .NC files with a floppy disk ( max program size is 1.44MB) and some hole interpulation programs take up alot of code.... real tough to fit it onto one disk.. if needed i use 2 floppy discs. the rs3232 port or whatever its called is shotGood iron is usually good iron forever. Currently involved in retrofitting some old gantry mills from the 70's. That being said, crappy iron is crappy forever.
Every time you use an RS232 port a kitten gets herpes. Good thing it is broken.I have to say, this old milltronics suprises me sometimes with the tight tolerences.... we have Unist on it ( great lubrication spray) but I am stuck with sending the .NC files with a floppy disk ( max program size is 1.44MB) and some hole interpulation programs take up alot of code.... real tough to fit it onto one disk.. if needed i use 2 floppy discs. the rs3232 port or whatever its called is shot
we do have a new milltronics mm-18 but some other guy is trying to use it today so im stuck with the good ol partner.. the mm-18 has a ethernet port that we will be running to my computer across the room. now that will be awesome for revisions to programs instead of the floppyEvery time you use an RS232 port a kitten gets herpes. Good thing it is broken.
I'd be happy to sell you a nice control retrofit.
DNC files on your HD over ethernet with a nice 200 block lookahead.
I have no idea what the hell is being said in this GMT.
i haven't been regular in awhile....
My dump this morning was well within tolerance. That is all.
Ask your boss for a nice new Makino A99we do have a new milltronics mm-18 but some other guy is trying to use it today so im stuck with the good ol partner.. the mm-18 has a ethernet port that we will be running to my computer across the room. now that will be awesome for revisions to programs instead of the floppy
holy shit its as big as my kitchenAsk your boss for a nice new Makino A99
She'd kill me if I put her pic on the interwebz.I will need to see pictures of your wife before I make decisions on fucking her?
Whatever you like Dan that is your business. I prefer the non flex types.She'd kill me if I put her pic on the interwebz.
"Looks Flexy" does apply, however.
I used to work for Makino, they make a lot of nice machines but that one was the dogs bollocks.holy shit its as big as my kitchen
WTF? Did you just get back from a semester abroad?es but that one was the dogs bollocks.
spoonful of Braggs's cider vinegar, spoonful of honey in a pint of water, heat, stir, drink, poop.i haven't been regular in awhile....
messing around with new note 4...
Whatever you like Dan that is your business. I prefer the non flex types.
I'm half Pommy and work with a bunch of Brummies.WTF? Did you just get back from a semester abroad?
When was the last time you had waffles? I think you need to eat something soon....I'm half Pommy and work with a bunch of Brummies.
Im eating one of these rihgt now...http://www.leesandwiches.com/main.php?act=prodetail&catid=16&id=Coconut_WaffleWhen was the last time you had waffles? I think you need to eat something soon....
you guys seriously still use inches?morning... just clicked "go" on this cnc program i programmed yesterday.. looks simple but that middle slot is +/- 0.002" ( which is not THAT terrible )
was watching the news w the mates quite drunk last night when the looting started.. mindblowing ( or is it....)
Used properly, 'dog's bollocks' would mean 'best thing ever'...I used to work for Makino, they make a lot of nice machines but that one was the dogs bollocks.
Perhaps an A66 is more your style. Good to see they still pull 6 figures after a decade of use.
http://www.ebay.com/itm/2001-MAKINO-A66-HIGH-SPEED-CNC-HORIZONTAL-MACHINING-CENTER-/231148943116?pt=LH_DefaultDomain_0&hash=item35d18cf70c
Yes, that machine is bad-ass.Used properly, 'dog's bollocks' would mean 'best thing ever'...