[unskilled]

seeing if it is possible to run hammerschmidtt on the new 09 demo's and or sx trail. are they iscg 03/05 tabs? there is no information on species site and i looked.

 

[wood booger]

Yes you can.

Hammerschmidt away to your hearts content.

 

[wakeeater]

HammerSchmidt
22/36T or 24/38T gear range with no missed shifts
Includes 22T and 24T chainrings and chainguide
Front shifter: HammerSchmidt X.0 or X.9 trigger only
Use with single-speed, 7-, 8-, or 9-speed chains
Can only be installed on a frame with ISCG 03 or 05 tabs

 

[unskilled]

gracias. no sé. con frecuencia yo tengo que pedalear mi moto montañas y me gustaría hacerlo fácil.

 

[DirtyMike]

Biggest thing with teh hammershidt, is makign sure it lines up properly. It comes with a guide to make sure it lines up properly. other than that, it works for both Iscg and Oscg05. Not sure if you can get the guide prior to getting the the system.

 

[sleepinggiant]

The tabs are ISCG '03 and their flush with the BB shell, HammerSchmidt will work fine.

 

[dilzy]

Edit...nevermind I didn't read the very last post, just the dribble above sleepinggiant.

He's right, except the tabs aren't flush with the bb shell. their a couple mm behind.

 

[DirtyMike]

That is true, the tabs are nto flush on the demo.

To clear things up, Here is the vid link on teh HammerSmidt<sp>

http://www.magicmechanics.com/home.php?lang=en#/how_it_works/

Watch the install video, and the frame Prep video, it will help alot as to which frames will work, and what you have to do

 

[sleepinggiant]

My bad. The tabs are flush on their other frames, I assumed the demo was the same.