What companies still make a frame in the United States for DH? Nothing Canadian, nothing Mexican, something produced domestically. Really, really over this bull**** of Taiwan right now.
People actually buy Foes bikes?
For serious, I never see them really....
yep. ill be ordering my 4th and possibly 5th one soon tooPeople actually buy Foes bikes?
For serious, I never see them really....
Ventana no longer makes a DH frame though. Intense, Zerode (oddly enough), and Foes are the only bikes that come to mind immediately.Ventana does everything in house, from machining to painting.
And their bikes are inexpensive
and they ride well.
maybe he just want to support an American company with American workers.I will say though, that your disgust/anger/whatever you want to call it with Taiwan is misguided. The US companies are responsible for the logistics involved for sourcing Taiwanese products and I guarantee you they know well in advance if something is off track with the supply chain and most choose to keep quiet. The only real excuse is dealing with a new vendor/supplier or if it is a new model - like your case.
If you think companies that produce frames through Taiwan vendors have little say in the quality control department you are sorely mistaken. If you are having a company produce your bike and you have never met them, you are destined to fail.Going to have to start looking into that. The delays I am getting told of because someone in Taiwan f-ed things up on that end are just unacceptable.
Globalization might have been a good idea on paper, but when your supply line is coming from another hemisphere, its impossible to really control the quality. You're taking the word of someone you may never meet, and while I understand its not the 1950's anymore, there's something to be said for being able to go down and deal with problems right then and there, versus waiting until you've already blown a shipping date and are leaving people high and dry.
It has nothing to do with taiwan but with bad management. Stuff like that happened to companies producing in yurp too.Though I'm not going to call names.I'm just gonna stop this rant now. I'm getting pissed over something I can't control. I know somewhere in the last three years I said that Serenity Prayer a lot over 9 months. I need to go back to that now. I can't change this, I can't control this, I can't intimidate this. I am just pissed off, out money, and back to square one. And I don't like Taiwan anymore.
Likewise, and yes, most companies do it for their own profit. However, well made products in Asia are still expensive to produce. Depends what quality the brand requests and pays for and monitors.I buy local as much as possible. Its bad practice to send all your money to the other side of the world and use tons of resources shipping the crap they make here. Its a bike. Why does it need to be made on the other side of the world? People will instantly say "to reduce costs". Well, I've seen many companies shift their production overseas and only have seen their prices go up. They were just as competitive when they made their frames locally.
Pretty sure they're looking for whomever can produce the same or better standard then they've been so far. Seeing as they're NZ based, Asia is closer than USA.And Zerode's shopping around (Asia, I assume) for a new manufacturer.
That's very debatable. Taiwan surely has the best mass produced bicycle manufacturing in the world at present. I'm personally very reluctant to send money to China. and would be very interested to know where the lowest environmental impact frames are made.I think when you're paying north of $3k for a frame it needs to be made domestically. Take the excuses out of the equation, get back to making great bikes.
I could be wrong,but I don't think the 9.9 is made here.That'd probably be enough for me to be irresponsible and buy one.Foes, Trek Session 9.9, Intense, BMW...
People haven't been saying to reduce cost for the last few years. Most companies go to Taiwan not because it's cheaper but because it's easier. You get all the technology in one place and it is easier to manage and easier to get.I buy local as much as possible. Its bad practice to send all your money to the other side of the world and use tons of resources shipping the crap they make here. Its a bike. Why does it need to be made on the other side of the world? People will instantly say "to reduce costs". Well, I've seen many companies shift their production overseas and only have seen their prices go up. They were just as competitive when they made their frames locally.
If you want a bike right away, give all the big mailorder guys (go-ride, Jenson etc.) a call and see what they have in stock. Pick from these choices the frame that you like best. Wait for brown Santa (2-3 days), grab some of your preferred beverage and lock yourself into your workshop for a couple of hours, ride!!!!!!!!!!People haven't been saying to reduce cost for the last few years. Most companies go to Taiwan not because it's cheaper but because it's easier. You get all the technology in one place and it is easier to manage and easier to get.
all their 9.9 OCLV frames are US made according to their siteI could be wrong,but I don't think the 9.9 is made here.That'd probably be enough for me to be irresponsible and buy one.
Some time ago the designer from Mountain Cycle was saying something like this on his blog. He also mentioned what would happen if all the US big names come back to a purely US-based production. The suppliers/machiners/welders simply wouldn't be able to keep up the pace, and the delays would be longer. The US industry simply can't cope with the production figures Taiwan and China do. Not to mention in some China cities (such as Guangzhou) you have the source material (aluminium, carbon fiber, steel, etc) factories, the metal milling/machining facilities and the final frame and component production, all in one place.People haven't been saying to reduce cost for the last few years. Most companies go to Taiwan not because it's cheaper but because it's easier. You get all the technology in one place and it is easier to manage and easier to get.
Not in several years; at this point, Alu is in Taiwan, and Carbon in China from what I understand. They did make the VPP bikes in the US up until 07 or 08, but nothing here since.Isn't santacruz USA made?
I spoke to Mark, he said that he is not going to be making frames anymore. Too bad, because he makes some great stuff.I really wish the Function Bikes frame would have made it to production, Purgatory Bikes are still made in the US in a guys(Mark Zmurko) basement, he does everything in house except welding(from memory) but he only does a few frames a year.
On my current DH bike only the fork, seat and bar are made in Taiwan, I have nothing against the Taiwanese but I like to spend money with companies that put effort in to keeping manufacture in the home country. When I can afford a Bos fork and someone does a non Taiwanese bar in a sweep I like I'll be Taiwan free(excluding bearings and shifter cable).
Damn, may have to see if I can buy one of his rear mechs just because they look awesome.I spoke to Mark, he said that he is not going to be making frames anymore. Too bad, because he makes some great stuff.
Its made here in the states.I could be wrong,but I don't think the 9.9 is made here.That'd probably be enough for me to be irresponsible and buy one.
stick to lawyering. your lack of manufacturing knowledge is the same kind that caused the hindenberg.I think when you're paying north of $3k for a frame it needs to be made domestically. Take the excuses out of the equation, get back to making great bikes.