So I found and ordered the Rough cut HLR damper for my Trace 34. Looking at the service video, to fill/bleed the damper and install it properly, I will need some proprietary tools.
No response from XFusion customer service, and have a friend with a shop-rat friend checking QBP catalog for me, but was wondering if anyone knew of an online source for the tools, most especially the bleed syringe with fitting.
I can improvise and have bled non-bladder dampers without a syringe, but this seems like a job really best done with the correct fitting, and The Internet says the foot nut tool is a real help too, though some posts say a long chainring nut can substitute.
DIY Suspension in Australia may be able to supply the syringe, at least, but that seems a little crazy on shipping.
Anyone know of a quick easy way to order direct from a stocking source?
No response from XFusion customer service, and have a friend with a shop-rat friend checking QBP catalog for me, but was wondering if anyone knew of an online source for the tools, most especially the bleed syringe with fitting.
I can improvise and have bled non-bladder dampers without a syringe, but this seems like a job really best done with the correct fitting, and The Internet says the foot nut tool is a real help too, though some posts say a long chainring nut can substitute.
DIY Suspension in Australia may be able to supply the syringe, at least, but that seems a little crazy on shipping.
Anyone know of a quick easy way to order direct from a stocking source?