...sure, you can't ride it downhill, but...
YOUR dream bike!
- Thread starter mshred
- Start date
...sure, you can't ride it downhill, but...
Hate this thread
I now have my dream bike in my factory Sunday. I don't know if it because the season is over but I am loosing interest in equipment because after 10 years of riding finally have the bike I have always wanted. My plans for next year is limited to UST or no UST rims - boring. Come on Iron Horse bring on the carbon Sunday or something.
I now have my dream bike in my factory Sunday. I don't know if it because the season is over but I am loosing interest in equipment because after 10 years of riding finally have the bike I have always wanted. My plans for next year is limited to UST or no UST rims - boring. Come on Iron Horse bring on the carbon Sunday or something.
^can you year CCRRAAACCKKK!!!! unless it was relly beefy
A honda but without a dumbo fender on it.
or a gearbox sunday all pimpdified
or a gearbox sunday all pimpdified
Lets start with a 2007 Morewood Izumu frame
Add a Cane Creek double-barrel with a ti spring.
Then, lets throw on a 2007 boxxer wc, 888sl, or 40rc2, depending on my mood.
Why not add middleburn cranks with a gumut chainguide?
Then of course Sram x.0 short cage r. derailluer and x.0 shifter.
Road cassette, hollowpin chain.
Then some red I-9 wheels on Mavic 823 rims
How about some thomson goodies? Ok: Stem, seatpost, check!
Odi rouge lock-on grips.
Maxxix highroller or minion tires.
Thats about it.
Add a Cane Creek double-barrel with a ti spring.
Then, lets throw on a 2007 boxxer wc, 888sl, or 40rc2, depending on my mood.
Why not add middleburn cranks with a gumut chainguide?
Then of course Sram x.0 short cage r. derailluer and x.0 shifter.
Road cassette, hollowpin chain.
Then some red I-9 wheels on Mavic 823 rims
How about some thomson goodies? Ok: Stem, seatpost, check!
Odi rouge lock-on grips.
Maxxix highroller or minion tires.
Thats about it.
2007 Sunn Radical
Stock build, with an e.thirteen LG-1 Guide, Deity Bar/Stem/Bar Ends/ Cranks/BB/DH Sprocket/Seat Collar, Crank Brothers 50/50 XX Pedals and a Custom Rota sticker kit.
Now all i need is for March to hurry up and come so i can make that dream a reality!
Stock build, with an e.thirteen LG-1 Guide, Deity Bar/Stem/Bar Ends/ Cranks/BB/DH Sprocket/Seat Collar, Crank Brothers 50/50 XX Pedals and a Custom Rota sticker kit.
Now all i need is for March to hurry up and come so i can make that dream a reality!
Cannondale Jude
Boxxer WC
Canecreak DB
Saint group
Hadley Hubs
Mag-30
Chris King Head-Set
Crankbros 50/50xx
Boxxer WC
Canecreak DB
Saint group
Hadley Hubs
Mag-30
Chris King Head-Set
Crankbros 50/50xx
intense socom, SRAM bits, XTR cranks and Saint brakes, King wheelset, Boxxer WC.
NIIIICE! I LIKE!!
NIIIICE! I LIKE!!
Haha, thanks mate.
I just started a new company (called Rota) thats soon the be the offical importer/distributer of Sunn bikes in australia. I have the Morewood for the moment but once everythings finalised and Sunn hits our shores then ill be packing a whole new stable of bikes...
I cant wait, these bikes are going to be off the hook!
What are you riding this season, Commencal?
Thanks mate, im pretty excited about it!
Thatd be pretty neat if you could get your hands on a 303. Im yet to spend anytime on one but i think its fair enough to assume there pretty dialed.
How come you turned down Commencal?
Sinister R9
Double Barrel/Ti
Boxxer WC
Code brakes
x.0/gamut drive
i9 on xm325
XT cranks
Mallet M pedals
Rocket SVT
Double Barrel/Ti
Boxxer WC
Code brakes
x.0/gamut drive
i9 on xm325
XT cranks
Mallet M pedals
Rocket SVT
Pricing. The deals on parts were where they needed to be but the frame and/or completes were just too much cash, due to the rediculously high MSRP. It's dissapointing since they are such dope bikes but what are you gunna do, I have much cheaper options out there.
303 is probubly ideal, However I'm not sure it will happen due to the fact that the team manager is trying to talk Yeti down to a rediculously low price for a 303, which im all in for but it will most likely not happen seeing as most people pay an arm and a leg for one at cost.
Santa Cruz v10,boxxer team 2007,magura gustavM,sram,truvativ,raceface,syntace,thomson,wtb,novatec,mavic,maxxis
I'd have two.
PDC Racing Eight2Five frame for DH
Fox 40 RC2
Cane Creek Double Barrel rear shock w/ Titanium spring
Avid Codes w/ Goodridge hoses
Industry Nine wheels w/ DT Swiss rims
Full SRAM X.O/X.9 drivetrain
Truvativ Holzfeller OCT cranks
Thomson seatpost
FSA Bars
FSA headset
E.13 Lg-1 or SRS Guide
ODI Rogue Lock-On Grips
Azonic Pooky Pedals
Kenda Kinetics DH tires
And an Iron Horse 6Point8 for everything else. Would switch out the DHX Air rear shock for a Double Barrel w/ Ti spring or a Roco TST-R w/ Ti spring, add Goodridge hoses to the brakes, and probably take off the front derailleur in favor for a E.13 STS Guide.
PDC Racing Eight2Five frame for DH
Fox 40 RC2
Cane Creek Double Barrel rear shock w/ Titanium spring
Avid Codes w/ Goodridge hoses
Industry Nine wheels w/ DT Swiss rims
Full SRAM X.O/X.9 drivetrain
Truvativ Holzfeller OCT cranks
Thomson seatpost
FSA Bars
FSA headset
E.13 Lg-1 or SRS Guide
ODI Rogue Lock-On Grips
Azonic Pooky Pedals
Kenda Kinetics DH tires
And an Iron Horse 6Point8 for everything else. Would switch out the DHX Air rear shock for a Double Barrel w/ Ti spring or a Roco TST-R w/ Ti spring, add Goodridge hoses to the brakes, and probably take off the front derailleur in favor for a E.13 STS Guide.
Thats a cool cool cool looking bike bro!
but with a DHX and new rear rim to go with the hadley in there
i need to get rid of my avent vandal and get myself a lambda with avvy forks and shock. thats my dream bike...
[if anyone has a lambda and wants to sell it, pm me!!]
[if anyone has a lambda and wants to sell it, pm me!!]
"Cooper The Floor Cruiser" DH mascot supreme
My Dream bikes are in the garage............and my mascot will kick your mascots ass!!!
The Nomad
The V10
I hate you.The V10
that thing is sexy.
Shes fine to ride.
Nothings changed and its still my current one ( for over a year id only changed one tire and bb, pads and some oil ). Oh and id changed the frame too for newer one with some better geometry for my fork, a little bit longer and with new barrels and shock plates. Now they should last forever!
Many of u will find such tank useless, but riding such bike when u got used to it can really bring a lot of fun ( and thats what biking is all about for me
)
Many of u will find such tank useless, but riding such bike when u got used to it can really bring a lot of fun ( and thats what biking is all about for me
)
I like that tank.........and I agree with you..it would be fun.
this was my tank before the V10, it's not a great pic but its me rocking Boondocks at Northstar on the old Banshee with the Avy and Monster T.....I love that bike. see below
this was my tank before the V10, it's not a great pic but its me rocking Boondocks at Northstar on the old Banshee with the Avy and Monster T.....I love that bike. see below
that thing is so sexy looking, omg.
I own it. Just got the 888 SL today. 
Check out my Hope Motos! SICK!
Check out my Hope Motos! SICK!
Same, specced as follows:
(i'm already running most of this)
Boxxer WC air
Fox DHX5
Hope proII / EX721 / dt comp / dt brass prolock
Saint brakes / levers
Saint shifter
Dura-ace chain
Dura-ace cassette
Dura-ace derailleur
Hone HD cranks
Easton EA70 lowrise bar
Thomson Elite 50mm stem
Wellgo MG-1 pedals
SDG ifly saddle
SDG ibeam post
Maxxis minion dhf f/r
Seven sola frame with sliding verticle drop outs
Marzocchi corsa WC
Seven stem
Seven Ti bars
Easton carbon post
WTB devo saddle
Hope mini manos
Middleburn RS8 cranks with 16 tooth trails ring
FSA platnum FR BB
Profile SS disk rear hub with 9 tooth cog
King front hub
mavic 717 rims
2.1 nevegal rear 2.3 front
Marzocchi corsa WC
Seven stem
Seven Ti bars
Easton carbon post
WTB devo saddle
Hope mini manos
Middleburn RS8 cranks with 16 tooth trails ring
FSA platnum FR BB
Profile SS disk rear hub with 9 tooth cog
King front hub
mavic 717 rims
2.1 nevegal rear 2.3 front
What the hell kind of gear ratio is that for a SS? You would have to run a 1-piece driver, which means BMX chain. Other than that I agree.
it's the same thing as a 32:18 ratio. but since the chainring and cog are so small, they will wear much quicker.
On a SS chain I am not to worried about chain wear.
And I know it's the same thing as a 32 18
It's a MTB disc hub
Custom reynolds 953 steel gearbox frameset, 9.5" with a floater. Braised and polished.
FYI 953 is a stainless alloy, no need for paint.
Or
Lahar DHV gearbox DH frame
Avalanche DHS with High/Low and Ti Spring.
888 SL ATA
Industry Nine DH hubs and spokes with ex823 rims, Minion DHF 2.5 UST tires
Industry Nines All Mtn hubs and spokes Stans ZTR flow (race wheels), Highroller 2.35 UST tyres.
165mm Middleburns, 07 Carbon XTR 36T ring, Evil LG1, Race Face Sig Ti BB with ceramic bearings.
X4, easton carbon DH bar, King HS.
Gustav brakes 210/190 or Formula Oro Puro with hope 220mm floating rotors.
Syncros Stainless Steel Mental Pedals.
FYI 953 is a stainless alloy, no need for paint.
Or
Lahar DHV gearbox DH frame
Avalanche DHS with High/Low and Ti Spring.
888 SL ATA
Industry Nine DH hubs and spokes with ex823 rims, Minion DHF 2.5 UST tires
Industry Nines All Mtn hubs and spokes Stans ZTR flow (race wheels), Highroller 2.35 UST tyres.
165mm Middleburns, 07 Carbon XTR 36T ring, Evil LG1, Race Face Sig Ti BB with ceramic bearings.
X4, easton carbon DH bar, King HS.
Gustav brakes 210/190 or Formula Oro Puro with hope 220mm floating rotors.
Syncros Stainless Steel Mental Pedals.
why would you put on an LG1 with a Gboxx frame?
Out of everything thats wrong with his spec list all you saw was the chianguide?
and the BB and the crankset and the chainring
and possibly the rear hub?
that too
