ok, so i know single pivots have lateral play; it's inherent to the design. so when my buddy sold me his bullit at a great deal i figured i could deal with a little wiggle while i am out in BC (leaving on the 12th of august) and then pick up a new dually later on this year (something with a solid rear ie 4bar, vpp). well, i took the bike out and man, this thing is FLEXY. i feel it when cornering, when landing drops when sittin and pedalling while i wiggle the bike side to side. i looked at the main pivots thinking they were loose but to know avail, snug as can be. i then grabbbed the rear wheel and held the main frame and this thing is moving like a 1/4" side to side with not a lot of force. i grabbed just the swingarm to see if it was just a loose hub but nope, still flexing. when i pull on it and look at the main pivot it seems like it actually flexing right at the pivot bolt. my question is, are Bullits really this flexy? if so, how do they not eat through shocks like mad, or do they? if something is up, what could it be/ would replacing the bearings help? is it possible my swingarm is ovavized where the bearings press into? i was able to remove the bearing (it is a bit crunchy) and put it back in by hand, is this normal? any advice is greatly appreciated as i am leaving in one week for my DREAM trip and i need to get this sorted out. thanks!