let me first start by saying this is the worst and most problem filled build ive ever had...and its a single speed street bike...
so i cannot seem to get my new colony cranks to work - the spindle is 6inches long and i dont think colony makes a longer length. the problem is that there is only 12mm of spindle left on the non-drive side for the 48 spline spindle to hook up to and since this is a 2.5 piece setup - i cannot just take spindle away from the drive side and shift it over to the non drive
so again - there is 12mm of free spindle o the non-drive side
the cranks have a 28mm long spline section in them - is 12mm long enough for a safe and strong "bite" if you will on the spindle??
the frame is an ns majesty and the BB is a colony mid 19mm
i just want this bike done so i can freaking ride
and yes, i need all the spacers i have on the drive and non-drive to clear the cranks and chainwheel
so i cannot seem to get my new colony cranks to work - the spindle is 6inches long and i dont think colony makes a longer length. the problem is that there is only 12mm of spindle left on the non-drive side for the 48 spline spindle to hook up to and since this is a 2.5 piece setup - i cannot just take spindle away from the drive side and shift it over to the non drive
so again - there is 12mm of free spindle o the non-drive side
the cranks have a 28mm long spline section in them - is 12mm long enough for a safe and strong "bite" if you will on the spindle??
the frame is an ns majesty and the BB is a colony mid 19mm
i just want this bike done so i can freaking ride
and yes, i need all the spacers i have on the drive and non-drive to clear the cranks and chainwheel
Last edited: