alright, I don't think I'm too dumb... but we'll see
Took apart my float today to install new seals and lower it. Using two 30mm spacers from Fox. Only thing is, after I put it all back together there was no difference in travel at all. I still measure a hair over 160mm of stanchion showing and definitely has WAY more stroke than 100mm...
I put the spacers on top of the air shaft as shown in the manual by Fox, I even took the fork back apart to double check.
Now all I have is an oily mess, what did I screw up? Leaving it apart until I can find out whats wrong
it looks like the diagram on the left except with two spacers on top of the spring.
Took apart my float today to install new seals and lower it. Using two 30mm spacers from Fox. Only thing is, after I put it all back together there was no difference in travel at all. I still measure a hair over 160mm of stanchion showing and definitely has WAY more stroke than 100mm...
I put the spacers on top of the air shaft as shown in the manual by Fox, I even took the fork back apart to double check.
Now all I have is an oily mess, what did I screw up? Leaving it apart until I can find out whats wrong
it looks like the diagram on the left except with two spacers on top of the spring.
Last edited: