Now companies like 661, rockgrden, etc. need to start making trail trap protection, like a piece of plastic that would connect from your helmet to your chest armor. Oh, we wouldn't be able to turn our heads w/o some contraption.
hey what is the best way to fix a pinch flat, if your not prepared. This weekend i was riding and my friend got a pinch flat. We did not have a tube, patch kit, or pump that would work with his bike, and this trail is rocky (cold springs) so there is no way he is going to ride it on a flat (hardly no sidewall) tire all the way down the next 4 or so miles. I told him to fill his tire with sand and leaves is this the best thing to do?
I wouldn't reccomend putting sand in the tire and then riding it, that seems like it would be very corrosive and damage the tire and rim, not to mention it would spill out quickly. And leaves won't work unless you can pack 50 lbs worth into the tire.
The best way to solve your problem is to carry a tire, pump, tire irons, and any allen wrenches if you have a thru-axle. If this is too much hassle (which it is for me) you can just run heavier tires and tubes.
If you're not prepared? Be good at wheelies maybe. I did that at Mammoth. When my front tire popped (kevlar beaded Kendas won't save you from rocks) I had to ride down the service road from halfway up the mtn. I just leaned back really, really far and watched out for rocks. My rim and tire are fine now.
zmtber- that is a stupid excuse, your friend dh sb rider has rides w/ a huge backpack ( there is plenty of room for the right tools), just get a small pump, a tube, tire levers, and an adapter for the pump if needed.
When I go on rides, I always take my camelback mini mule. It is small, but can easily hold those tools, gloves, goggles, and other tools w/ enough room for the water container.
zmtber, you completely derailed your own thread, haha
o yeah and talking about flats on trails at bad times is a trail story i am sure others have other storys like it, in which they had to walk/carry thier bike down a long trail.
im going tubless i dont have to worry about that as much, but the reason why there was a flat was previously stated i was prepared my friend (not dh sb rider)was not
Well,tell him to carry to tools. I am sicking with a tube setup because it is easy to fix.I don't have to worry about a sealant and all that crap.
HERE IS A TIP: While your bike is running tubes right now, put alot above baby powder allover the inside of the tire and around the tube. Since I have been doing this, the last pich flat or basic flat even was a year ago.
I was backpacking on the Appalachian Trail and was off on a side trail kinda lost and came across a hillbilly in a barn on a stool f*ing a horse. No lie.
Hey Patrick......zac has (belive it or not) other friends then me...... I just carry a big backpack for me and i have all the right tools to fix my own stuff. So please stay in the vally, and dont ever go over the pass, or you will be shot. Thanks
Ya my favortie story was when i was going down Cold Springs and we wouldent let any of the fast guys go past us(Trevor, Matt, Evan, Juilan) so the entire lower section of Cold Springs was really boring for them......Which was are plan.(They were waiting at the fire road for us and we just dident look at them we jsut went past them straight into the lower single track.) Then some 369 pound dude shot outa no were and he was riding this stinky dee-lux, dhx air, rockgardn armor, zoke decals up-side-down, ya he was so big i thought he was a bear......so i fell off a cliff.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.