Who has the best bike
- Thread starter deity
- Start date
05 Chase work in progress, still to be put on SS, e.13 32 special, Deity cranks, Atomlab PIMP rear wheel.
dude that is the sickest bike i have ever seen in mys life, hands down no doubt about it, major props dude
Finally finished building her today:
Build:
Frame: Nemesis Project Secret Agent
Fork: Argyle 409 @ 80mm
Stem and Bars: Nemesis Project
Grips: Duo Cranmer
Brake: Juicy 7
Headset: CK NoThreadSet
Wheels: DT Swiss FR 6.1d laced to DMR Revolver hubs
Crank Set: Profile Race w/ Ti spindle
Sprocket: Tree Lite
Pedals: Fly Ruben
Seat post: Thomson Elite 250mm
Seat: FBM Rumble
Tire: Kenda Short Trackers (probably changing in the near future)
Just need to find where I stuck the rear hub bolts so I can lose the quick release.
Build:
Frame: Nemesis Project Secret Agent
Fork: Argyle 409 @ 80mm
Stem and Bars: Nemesis Project
Grips: Duo Cranmer
Brake: Juicy 7
Headset: CK NoThreadSet
Wheels: DT Swiss FR 6.1d laced to DMR Revolver hubs
Crank Set: Profile Race w/ Ti spindle
Sprocket: Tree Lite
Pedals: Fly Ruben
Seat post: Thomson Elite 250mm
Seat: FBM Rumble
Tire: Kenda Short Trackers (probably changing in the near future)
Just need to find where I stuck the rear hub bolts so I can lose the quick release.
That's unbelievably sexy. ^^
wow! those bars are immense. Sweet build. very clean.
This thread is insanely great. Thanks for bringing it back.
i think so
those white rims make the stp look really good, one of the nicest bikes ive seeenNew wheels today.
I don't ride BMX bikes but I would sell a kidney for that bike!
Niquet...? What is that and what's the geo???
Looking good!Finally finished building her today:
Build:
Frame: Nemesis Project Secret Agent
Fork: Argyle 409 @ 80mm
Stem and Bars: Nemesis Project
Grips: Duo Cranmer
Brake: Juicy 7
Headset: CK NoThreadSet
Wheels: DT Swiss FR 6.1d laced to DMR Revolver hubs
Crank Set: Profile Race w/ Ti spindle
Sprocket: Tree Lite
Pedals: Fly Ruben
Seat post: Thomson Elite 250mm
Seat: FBM Rumble
Tire: Kenda Short Trackers (probably changing in the near future)
Just need to find where I stuck the rear hub bolts so I can lose the quick release.
Rad rides all over the place...
Its a NSbikes Suburban, 2.4kg...geo:
Here are some specs:
Fork - Dj2 07 80mm
Cranks - White profile cranks with TI axle
Stem and bars - tioga cube 35mm and protaper
Hubs - atomlab in the front, and geisha freecoaster
Sprocket - profile imperial 25t
Brakes - Hayes Mag
Headset - Chris King
Pedals - Crankbros 50-50
This one's for sale too...
This one's for sale too...
looks nice and clean how much do u want for it.....pm me:biggrin:
Oh hell yeah, I've checked them out before and dug em. But I don't think I found any US distributors or something...
as i know , the US distributor is bti-usa.com
Sweet.... and I've got a bud who owns a shop...and owes me money... 
old picture from around April/May, but it shows the stance.
...didn't like the green frame at first, but since I bought it used for a great deal I was prepared to deal... although the more I see it, the more I like it so it might stick that color for the season until I get bored over winter...
the bigfoot au naturale look wasn't intentional (although it fits the park setting picture, haha). I was going to rattle can the whole thing in lilac and primer grey but I haven't gotten around to it...
since that photo I have added a Schwalbe table up front and a Rebate 1420 with the disc mounts ground off, as well as some wide ride NemPro Folsom bars. The rigid is nice, very simple and fun, but the DJ2 may be going back on. Even set at 55mm like in the picture, my hack job riding misses the give, haha... not to mention, the 425mm a2c of the Rebate lowers the bb height just a hair more than I really like.
Can't really tell in the pic here (someone stole my camera in June somewhere between Portland and Seattle and I can't afford a new one), but the disc mount tabs are ground off the DJ2 lowers and smoothed, as well as the 6 bolt rotor mount holes from the front hub. Very smooth.
...didn't like the green frame at first, but since I bought it used for a great deal I was prepared to deal... although the more I see it, the more I like it so it might stick that color for the season until I get bored over winter...
the bigfoot au naturale look wasn't intentional (although it fits the park setting picture, haha). I was going to rattle can the whole thing in lilac and primer grey but I haven't gotten around to it...
since that photo I have added a Schwalbe table up front and a Rebate 1420 with the disc mounts ground off, as well as some wide ride NemPro Folsom bars. The rigid is nice, very simple and fun, but the DJ2 may be going back on. Even set at 55mm like in the picture, my hack job riding misses the give, haha... not to mention, the 425mm a2c of the Rebate lowers the bb height just a hair more than I really like.
Can't really tell in the pic here (someone stole my camera in June somewhere between Portland and Seattle and I can't afford a new one), but the disc mount tabs are ground off the DJ2 lowers and smoothed, as well as the 6 bolt rotor mount holes from the front hub. Very smooth.
Let me add a little something to this thread.....
Is ur pike custom tuned? Is that at 95mm cus it looks smaller?I will have the halo front to match the rear next month but here is my Black Market.
zod, yer bikes suxxx
My Pike custom cut to 65mm
Finally finished building her today:
Build:
Frame: Nemesis Project Secret Agent
Fork: Argyle 409 @ 80mm
Stem and Bars: Nemesis Project
Grips: Duo Cranmer
Brake: Juicy 7
Headset: CK NoThreadSet
Wheels: DT Swiss FR 6.1d laced to DMR Revolver hubs
Crank Set: Profile Race w/ Ti spindle
Sprocket: Tree Lite
Pedals: Fly Ruben
Seat post: Thomson Elite 250mm
Seat: FBM Rumble
Tire: Kenda Short Trackers (probably changing in the near future)
Just need to find where I stuck the rear hub bolts so I can lose the quick release.
very beautiful build!
just a heads up, I believe your chain is on in the wrong direction...
Yeah....I'm gonna get my next bikes from Chinazod, yer bikes suxxx
003.jpg[/IMG]
you need these!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=220140186914&ssPageName=STRK:MEWA:IT&ih=012
here is my new build.
^^^have I seen that 20 in the background???
i wana play too. since iam broken at the moment i sorta just half assed the build so i could atleast cruise it to the beach. needs the chain shortened but cant do it one handed so iam riding dirty and brakeless till the cast comes off. bottom line....
nemesis project secret agent
nemesis tuned z1
nemesis urban camo stem #11
nemesis project folsom prison bars
shadow seat post
shadow seat
animal pedals
diety bb/cranks
nemesis project secret agent
nemesis tuned z1
nemesis urban camo stem #11
nemesis project folsom prison bars
shadow seat post
shadow seat
animal pedals
diety bb/cranks
yeah, it was posted up a while ago. Only thing new to it is some pegs, i started doing pedal grinds and so i decided to try em.
Yeah, I know... I was so excited when my cranks finally showed up that I threw the thing together at midnight, and didn't even notice for a few days. Whoops.