Quantcast

Search results

  1. Hydraulicman

    Alternative to Magura Suspension Blood???

    In my downhill period I did all the basic maintenance to my forks myself. I now started XC'ing again, so I also wanted to do it to my Durin. I read in the service manual that I should use magura suspension blood Type 5 for lubrication in the lower legs...
  2. Hydraulicman

    40lb post! DH/FR Rigs around the 40lb mark! tips, pics, specs

    Nice socom I also have one and really like mine, but 36 lbs with 2ply intense tyres and without ti spring and the moto V2 brakes... I only get 37.2lbs with maxxis 2ply, ti spring and juicy carbons... Do you have a full spec list and was it weighted using a bathroom scale or digi hang scale ;)
  3. Hydraulicman

    FSA gravity vrs. shimano hones

    Yess, these are the ones.
  4. Hydraulicman

    FSA gravity vrs. shimano hones

    Like Udi said. Get the hones with the 2 rings and the bashguard they have the pedal inserts and the chromo spindle. The 3 ring Hones DON'T have this. I'm about 160lbs and been running my hones in 2007. I hit my crank once on a rock and they are still straight. If you need a 73mm setup I...
  5. Hydraulicman

    40lb post! DH/FR Rigs around the 40lb mark! tips, pics, specs

    Mine @ 37.2lbs
  6. Hydraulicman

    My 07 Race steed: SOCOM @ 37.2lbs

    Hey, The frame is an M, the RS works super, but i guess it also would on any other frame...:)
  7. Hydraulicman

    My 07 Race steed: SOCOM @ 37.2lbs

    Thx, yeah i know about the pedals, but these are going strong for like 5 years or so. Only had to replace one bearing and I really like them, so why replace them ;)
  8. Hydraulicman

    My 07 Race steed: SOCOM @ 37.2lbs

    It rides very well, pedals like a dream and it's 2.5kg lighter then my old bike , it's so easy to trow around. I chose 2ply tyres because on some tracks overhere you have some pretty big rocks:) And I did get the 2.35 2ply's at chainreaction, can't you get those in the us? I also...
  9. Hydraulicman

    My 07 Race steed: SOCOM @ 37.2lbs

    After sitting 4 months on my lazy ass in the afghani desert, a man can give himself a little present... Some parts from my dhr, some brand new... Oh and it pedals like a rocket :) And yes I know my lg1 isn't in the 12'o clock position, but I dremeled the hell out off it so I could rotate...
  10. Hydraulicman

    Intense spring rate chart not correct...?

    I going to buy a Ti spring for my SOCOM so I want to know it for sure. According to Intense I need a 400lbs spring to get 30-35% sag with my weight of 75kg-165lbs (with gear) Now I used the push industries sag chart to calculate my correct amount of sag...
  11. Hydraulicman

    How to disassemble a Sun Ringle Abbah Lawwill 12mm Rr Hub

    I'm also having my rear abbah bearings replaced and this is what I got from sun: Thanks for the email!!! Sounds like your bearings have worn. All your going to need is a 17mm cone wrench and something to hold the inner axel from spinning (park spanner wrench works well) take the drive side...
  12. Hydraulicman

    Switching red star on juicy levers to bottom side of lever???

    Hey, I bought 06 juicy carbons, but I read alot about the red star knobs breaking off because of crashes. I haven't seen my juicy carbons yet(still in afghanistan for 1 week) but I heard from Yeti that on the old juicy 7's that you can switch the red star on the bottom side of the lever...
  13. Hydraulicman

    Will 2.8 spring work on 3.0 shock???

    hehe, my bad, just saw my mistake:poster_oops: , you know me always care more about the women then my bike... I know i've been away for too long. Preparations to go to afghanistan, then now at the moment in afghanistan. But i'll be back in the beginning of july and I will be back better then...
  14. Hydraulicman

    Will 2.8 spring work on 3.0 shock???

    I can maybe get an 400lbsx2.8 tit spring for my 3.0stroke dhx. But will it fit I already looked a bit with the search function and I found this Originally Posted by Udi: followed by manitou which have seriously low winds and nice big spacings. They look cool and save a heap of weight...
  15. Hydraulicman

    i'm in love again

    Uberbling Yeti:shocked: , hope you can ride her again @ portes du soleil this summer
  16. Hydraulicman

    Merry Christmas - Between the Tape Site/Teaser

    OMG :shocked: and i tought it couldn't get better after Hypnosis. Anyone knows the title of the song that starts at 1.38
  17. Hydraulicman

    Monkey`s Pets

    My latest, an english bulldog named Bruce: 3 and a half month old, 17kg, stubborn and lazy, he snores and his farts are like... :eek: :help:
  18. Hydraulicman

    Video - Toby Pantling, a new discovery from the UK!

    Hmz, I can't seem to watch it, it always stops at 9 seconds :disgust:
  19. Hydraulicman

    Earthed 4

    http://www.ridemonkey.com/forums/showthread.php?t=169950 Hmz, this has been on top from like ... yesterday:brow:
  20. Hydraulicman

    Monkey`s Pets

    This kinda is/was mine. Since i broke up with my girlfriend he stayed there since she has a backyard, but I still take him for those long romantic evening walks:love: 1year 2 month old amstaff named Tyson
Top Bottom