either that or drugs. bonedeath dudes dont f around.How crappy beers do you have to drink before participating in that? That's nuts hahah
either that or drugs. bonedeath dudes dont f around.How crappy beers do you have to drink before participating in that? That's nuts hahah
Full Steam!
Ive been to skatopia in the early 90's when it was WAY worse than anything now. I can say it was the only time in my life where I was afraid someone might actually try to blow up the car i was sleeping in.That looks like a more timid (bike) version of Skatopia.
You really putting on a race June 1st? Like really really? I'll be in town that weekend.Under the lights, Saturday June 1st
Roxbury, NH
Hmm, not exactly Skunkworks level stuff here.![]()
Stevie's bar is basically a Boobar with different colors. How Blackbox is that?
View attachment 113867
i bet you've got some stories from there. oh my.Ive been to skatopia in the early 90's when it was WAY worse than anything now. I can say it was the only time in my life where I was afraid someone might actually try to blow up the car i was sleeping in.
Yeah.You really putting on a race June 1st? Like really really? I'll be in town that weekend.
you sure do like your politics!Yeah.
I'll send out press releases next week.
Matt Green and I are building the tracks.
I'm knee deep in freestyle bmx politics this week!
but where's the geometry?Trek on the 29er Enduro Bandwagon: http://www.bikerumor.com/2013/05/17/trek-world-racing-on-29ers-for-world-enduro-series/
http://www.mellowjohnnys.com/tech-specs-trek-remedy-9-29/but where's the geometry?
Now if we could just get some price point trickle down...I just need to chime and say that in 2013, XX1 is pretty friggin' awesome. Totally clean and silent set up. I've always had a close, personal relationship with my granny gears but the spread is wide enough that I can get away with the 1X. I am not using a guide and I haven't dropped my chain once, not even pedaling through rocks at speed in Downieville. We'll see how it works out durability-wise, but as far as function goes, I am on board. (And I'm one of those guys who swore off SRAM drivetrains a while back.)
Agreed. I hope the come out with cheaper cassettes before I need a new one.Now if we could just get some price point trickle down...
Agreed. I hope the come out with cheaper cassettes before I need a new one.![]()
The XX1 rings actually are not too expensive - around $80 -$90 - and you only need one. The cassettes, on the other hand, are $425.Hopefully the RF narrow/ride rings will be pretty reasonable, and I suspect more budget minded (if heavier) 42 tooth cog cassettes will be available soon enough.
Btw, if memory serves, didn't you have a carbon Nomad nicked awhile back? If so, any comparisons to the new Bronson (<-- congrats on that hotness)?
on it!Hey mickey, when you're done, build this
You know......while you're out there and all![]()
the aftermarket is going to be all over this soon enough (big cassettes as well as ring rip offs [a couple of which are already out there]).Hopefully the RF narrow/ride rings will be pretty reasonable, and I suspect more budget minded (if heavier) 42 tooth cog cassettes will be available soon enough.
I'm running that WolfsTooth ring in a 30t for the 104bcd pattern and loving it. I've completely removed any and all chainguide devices on Pivot 5.7c aside from a Zee rear derailleur and it's the perfect setup for me. 2013 piece of awesome for sure!the aftermarket is going to be all over this soon enough (big cassettes as well as ring rip offs [a couple of which are already out there]).
![]()
how do you like that zee setup? i'm eye f*ing the zee short cage with the 9speed mod for my DH setup.I'm running that WolfsTooth ring in a 30t for the 104bcd pattern and loving it. I've completely removed any and all chainguide devices on Pivot 5.7c aside from a Zee rear derailleur and it's the perfect setup for me. 2013 piece of awesome for sure!
I bought the Zee derailleur with a 36t capacity and 25t chain wrap and it's been bitching. The setup is super compact, it shifts great all the time and as previously mentioned I've not dropped a chain. I usually run Sram X0 but I decided to try an XT setup, then went to a Zee 1x10 combo. I'm installing an XT 2x10 setup with the Ispec shifters tonight for this weekends 24hr race but then it will be back to XT/Zee.how do you like that zee setup? i'm eye f*ing the zee short cage with the 9speed mod for my DH setup.
Just wait for Shimano's answer to XX1 soonNow if we could just get some price point trickle down...
A tiny trickle, but x9 can't be far behind.Now if we could just get some price point trickle down...
hey what cassette were you looking at? Kind of tough finding one that'll drop three gears and not 4 or all of them...I'm dumping the 9speed Sram X0 setup that's currently on my DH bike for an XT shifter/Zee derailleur as well.
At Sea Otter this year I snapped this pic and talked to the guys at RaceFace and I'll match a 36t ring with a 7sped setup with 10spd spacing.
i'm running the zee w/ an 11-36 10 speed (w/ 32 single front) as well. solid wide range, great value setup.I bought the Zee derailleur with a 36t capacity and 25t chain wrap and it's been bitching.
check the sram low-ish end (850, 950, etc) cassettes. those are usually just held together by a single allen pin so you can just take 'em apart and use whatever.hey what cassette were you looking at? Kind of tough finding one that'll drop three gears and not 4 or all of them...
Ditto.i'm running the zee w/ an 11-36 10 speed (w/ 32 single front) as well. solid wide range, great value setup.
NiceA tiny trickle, but x9 can't be far behind.
http://www.cyclingnews.com/news/sram-to-introduce-x0-1x11-drivetrain-for-2014
Action-tec individual titanium cogs is the ideal setup, but for now I have an old 12-27t 8speed alloy cassette that I've re-spaced to 10speed and dumped a set of cogs from. 6speed is hard to get the limits to work correctly on an X0 derailleur so I'm moving to Zee and going to 7. The Action-tec should shift a little smoother too. If you need some cogs, I have a bucket full here from Shimano and Sram cassettes that I never used that I could send you.hey what cassette were you looking at? Kind of tough finding one that'll drop three gears and not 4 or all of them...
I thought the same thing setting mine up. I ended up taking one chain link out. As the cage rotates it creates additional clearance for the 36t cog, which then allows you to turn the B-limit screw out to allow the derailleur to sit further forward and let suspension to cycle without issue in the 36t ring.Ditto.
Question for you though, were you able to set up the rear derailleur to take up enough slack for the 11t cog to be usable? I've had to limit out that 11t cog caus my chain is to long and the ss derailleur can't take up all the slack. I'm wondering if I'm doing something wrong.
But can you really climb with that in mountain-areas?i'm running the zee w/ an 11-36 10 speed (w/ 32 single front) as well. solid wide range, great value setup.
depends. my rule is: if i need to spin that much (with a 2x10) to move that little i rather walk the bike. also you get fit much faster with only one ringBut can you really climb with that in mountain-areas?