Hi, yes the Demo 8 is still for sale.If you are interested please email me @ bryanwillis1@verizon.net I dont get to check my accounts too often. Thanks Bryan
What I opened up I did by hand so if nothing else is loose I wont be opening it. It was the oring fault that made me think something was wrong with shock so I figured I would change oil and that is when I noticed the loose body.I dont know if air was getting in to cause the malfunction.
That sounds kinda like what happened to mine, but mine lost comp and rebound because of an oring.That is when I noticed mine was loose.Mine was the shaft end not the resi.
How could I have messed up that oring in there.I would have to think it was seated wrong when built and it slowly worked its way out of its spot.The shock worked great for about 4 days of dhing.I actually bought my frame from you guys at DOWNCYCLES.The 5th shock had to come off it sucked so...
Are the 10mm shock hardware still 1/2 du bushing size?I might be getting a shock off of an 07 for my 06.I am hoping to swap out bushings and be all set. DH9
Not to worried about warranty,they have helped our team out alot this year.We are running 888 slatas and had some issues but they took care of them.My freinds roco loosened up on the other end. The shock does seem simple enough for most to work on it.DH9
I opened up my roco because my rebound and dampening were to fast and I couldnt slow them down.I could take the shock by hand so I am glad I cought that too.Here is what I found, a thin oring wraped up in all the port holes for oil to flow.In the pics is where I think the oring goes, but cant...
I have a ROCO wc and I think I blew mine.There is no oil any were to be seen. My shock is a poggo stick and the only way to get it anywhere to feel good is close the rebound all the way, but it blows through the travel, evan with comp. knob closed also.I got about 10 runs at HIGHLAND MT. before...
I know I saw it somewhwere here but cant find it know, but I was wondering the best way to change the oil in my ROCO WC.I have an IH SUNDAY and need faster rebound so I am putting in 2.5 and like water,I think about 3 to 1.I am getting oil wed night and am leaving for the open thurs so I have 1...
Does anyone know the size of the bearing inside the compression adjuster knob.I thought I read somewhere that I had to take off the knob so it would clear my dw link, so I did. After a ride I figured I would put it back together without spring and compress suspension and it doesnt hit. So the...
Well I rode a couple of times with the 5th and finally got the ROCO.Just putting the ROCO on I could feel the differance.If my 5th came tuned for dw, and my ROCO is stock, why is the ROCO faster in rebound and dampeing?I am going to change oil to a lighter weight so there will be better...
Here is my SUNDAY weighing in at 42.9 pounds.I am swapping out guide for lg-1,rear shock to roco,and maybe bars.I do want to reweigh on a differant scale.I was trying to build this bike for 3000.00 and missed that by 200.00. Still not bad for a dh bike.
If there is a problam with loose shocks on 05 and 06 models cant you get wider bushings to take up xtra slack.I dont think I should have tighten my bolts so much to pull frame and top rocker arms in to tighten against shock.It seems to me the bushings should be wider, because when I put shock in...
I just bought an 06 SUNDAY and was wondering if anyone new the spindle width of the bottom bracket,I know the cups are 83 mm. and people run 165 mm cranks.Thanks DH9
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.