Help with some burly hardtail pics...
- Thread starter Warped
- Start date
:devil:
MY NEW RIDE!!!! 
(not)
(not)
I agree
C
Cheers
Guest
Nice bike! Did you leave the front brake cable long so you can to bar spins and x ups?
well by the look of it my frames the same as pyslo's a pashley 24mhz, i'll have some better close up ones some time this week but heres one or too from my 1st proper ride, theres a few differances now but i'll tell u about them when i have the pics (ones a rear disc mount)
Attachments
heres another
Attachments
i didn't get it off pashley i made it at work(enginer) its a mk1 at teh mo but i'll have pics tomorrow i hope if i get the flim developed, all it invoves is a primo chain tug and nice bits of 6mm steel welded and drilled in the right spots only took an hr to 2
i've still got a few problems most of it being qr related but i'm makeing a 12mm bolt through rear axle which will solve that.
priss
priss
C
Cheers
Guest
Hey PGR....
I didn't want to mention the other things as I just figure he was so excited to get a pic he didn't want to wait
But I seriously wanted to know about the cable.
I never point that kind of stuff out, I can't living in this big ole glass house!
I didn't want to mention the other things as I just figure he was so excited to get a pic he didn't want to wait
But I seriously wanted to know about the cable.
I never point that kind of stuff out, I can't living in this big ole glass house!
ohhhhhh no....
that's not my bike......
see, it says (not) up there
that's not my bike......
see, it says (not) up there
I don't mean to whinge, but where the f*** is your helmet kid?
well i'll add my stead
Attachments
F*** that! Dirt jump lids are dirt cheap!! If you can afford a bike built to survive jumping, you can afford a killer helmet, if not 5 cheap ones...
Love your sig by the way...
Very true, very true. I didn't *really* think that people refuse to wear helmets b/c of cost, though...
(Thanks...I was gonna use the little ska guy from an Op Ivy album, but he didn't scan so well...I think this one's better...though I still kinda feel like a thief.)
(Thanks...I was gonna use the little ska guy from an Op Ivy album, but he didn't scan so well...I think this one's better...though I still kinda feel like a thief.)
i personaly don't use one unless i'm doing a dh(mx one)' piss pots' as there know on this side of the pond never feel right on my head they woble when jumping and distract me and often in crashed they come off , well they do on my head, that and to me a bit of plastic and 1/2 and inch of foam doesn't really protect me i've still got ko'd when using one ok i probbly would if i han'd had one but i wouldn't be left with stiches from the shatterd plastic that was my 'pisspot'
anyway thats my rant, the way i look at it if u don't want to don't bother and u can suffer the consiquences.
priss
anyway thats my rant, the way i look at it if u don't want to don't bother and u can suffer the consiquences.
priss
1/2" of foam and some plastic don't protect you? OK, I'm gonna hit you in the head with a hammer. Do you 1) want a helmet, or 2) not want a helmet?
Gimme a break.
Yeah, it's gonna hurt either way, but... I've crashed and been KO'd and/or recieved a concussion with a fullface on, too...don't complain that you were KO'd. Be glad your brains aren't splattered on a rock.
I'm pretty much a libertarian...so I think it's pretty much gonna be your choice to wear it or not, but I can't say I think you're making a smart or good choice.
Then again, I don't want the rest of society paying for an idiot's medical care, either, in the form of higher medical insurance.
I think this argument's gonna go on forever and this isn't the place; people want pics of hardtails here, so that's my last cent on the issue. Rebut if you will, or just send me a PM...I think everyone's prolly tired of this already. Ride on, be safe.
MD
Gimme a break.
Yeah, it's gonna hurt either way, but... I've crashed and been KO'd and/or recieved a concussion with a fullface on, too...don't complain that you were KO'd. Be glad your brains aren't splattered on a rock.
I'm pretty much a libertarian...so I think it's pretty much gonna be your choice to wear it or not, but I can't say I think you're making a smart or good choice.
Then again, I don't want the rest of society paying for an idiot's medical care, either, in the form of higher medical insurance.
I think this argument's gonna go on forever and this isn't the place; people want pics of hardtails here, so that's my last cent on the issue. Rebut if you will, or just send me a PM...I think everyone's prolly tired of this already. Ride on, be safe.
MD
fair enough, just my way of riding i find em annoying i'll ride with out unless i have to aka dh
priss
priss
that baby looks sweet. give us some stats
Its exactly the same frame as the azonic evolution.
nice ride, wot u think of the shiver sc?
priss
priss
The model is called "Xelos". From what I can see, it only comes as a complete bike. Direct link.
The price is 13.995 Swedish crowns. That's 1.356,99 US$ with todays exchange rate...
If you are serious about maybe getting this bike, it will most likely be a pain for you to get a hold of one, since you live in the Americas.
Craftworks Rail
Marzocchi Z1 MCR
Hayes Brakes
Race Face Prodigy DH cranks
XT Rhinolite wheels
Rocket shifters
Maxxis High Rollers 2.5
XT shifters
WANTED: a chain guide!!!!!
Okay, here is the review, I took it dirtjumping yesterday, it was the bike and mines first time. The bike is very balanced feeling. I thought the weight would be an issue, but it just seemed to make everything feel stable. The finish of the bike is good. It is anodised, which I admit is nice to look at but not so strong! The welds are quality, and the design seems bomb proof.
Rob
Marzocchi Z1 MCR
Hayes Brakes
Race Face Prodigy DH cranks
XT Rhinolite wheels
Rocket shifters
Maxxis High Rollers 2.5
XT shifters
WANTED: a chain guide!!!!!
Okay, here is the review, I took it dirtjumping yesterday, it was the bike and mines first time. The bike is very balanced feeling. I thought the weight would be an issue, but it just seemed to make everything feel stable. The finish of the bike is good. It is anodised, which I admit is nice to look at but not so strong! The welds are quality, and the design seems bomb proof.
Rob
If you missed Timmy Turtle's post, it is most likely the exact same frame as the Azonic Evolution. At least it looks that way frome the pic. They retail for around 450(?)